Dymo KeepnTrack Manual de instalación - Página 13

Navegue en línea o descargue pdf Manual de instalación para Software Dymo KeepnTrack. Dymo KeepnTrack 16 páginas. Badge printer

Clearing Label Jams

1. Tear off any labels that have already fed through the printer.

2. Press the label release lever forward and pull the jammed label out of the label feed slot.

3. Make sure your labels are loaded properly and that the left edge of the label is aligned with the

left edge of the label feed slot.

Correcting Poor Print Quality

Poor print quality is most frequently caused by one of the following:

• An old roll of labels

• Labels not obtained from COMPanion

• Labels where the thermal coating has been compromised

• A dirty print head

First, make sure you are using COMPanion labels. Do not use third-party labels because the thermal

coating on other labels may have a different sensitivity. Also, the perforated holes between the labels

made by other manufacturers are frequently not detectable by these printers.

If the print quality becomes faint, small dots of white appear scattered through the printed

characters, or light and dark patches of printing appear, you are probably using a faulty roll of

labels. Try using a different roll from a fresh box. If the second roll prints correctly, the problem is

with the ﬁrst roll of labels.

Another possibility is that the LabelWriter print head needs cleaning. Every LabelWriter printer comes

with a cleaning card.

You can easily clean your Badge Printer using the following items:

• Lint-free cloth.

• Isopropyl alcohol, diluted dishwashing detergent, or diluted ammonia free glass cleaner.

• Small, soft brush, such as a tooth brush or child's paint brush.

• LabelWriter cleaning card.

To keep your Badge Printer working properly, you should clean it from time to time. Dusting the

outside of the printer occasionally will help keep foreign matter from getting inside the printer.

However, it is still a good idea to periodically perform some basic interior maintenance, such as

cleaning the label path with the cleaning card.

To clean the exterior of your printer and the label roll compartment

1. Disconnect the power cord.

IG0080.8 - v6010 Badge Printer!

Troubleshooting Tips