Dymo LabelWriter 330 Manual complementario - Página 2

Navegue en línea o descargue pdf Manual complementario para Software Dymo LabelWriter 330. Dymo LabelWriter 330 5 páginas. Enhancing image quality output using labelwriter 300 series printer

Imprimir página

The second most important attribute is graphic size. A graphic should always be imported as

actual size where possible. Whenever a graphic is resized by the software, a lessening of

the output quality will occur. Thus, to print a graphic that is 1" wide x 1" high on the LabelWriter,

the ideal size of the image should be 300 dots (or pixels) x 300 dots.

Application Settings

The Windows version of DYMO LabelWriter Software (DLS) has a setting to optimize the output

of graphical images. The setting can be found under the Preference menu in the "General Settings"

tab. It is called "Optimize Graphic & Bar Code Printing for Best Quality" (See Figure 3). Utilizing

this option will always place the LabelWriter printer into Bar Code and Graphics mode when print-

ing complex graphical images. This reduces the amount of dot "blooming" and results in sharper

and more detailed graphics. Note that this setting slows down the print speed of the LabelWriter by

approximately 50%.

Print Driver Settings

Both the Mac and Windows versions of the LabelWriter print drivers also have a similar

setting for Print Quality. Again, Bar Code and Graphics mode is preferred when printing any

kind of complex graphic. On the Mac platform, this setting can be found in the "Page Setup"

dialog box (See Figure 4) and replaces the application setting that is present in the Windows

software. While the Windows print drivers have a similar setting, it is only utilized when printing

from non-DYMO versions of software. Additionally, the Windows platform offers some OS-level

controls for printing graphics.

Optimizing graphical output

Figure 3.

Figure 4.