Gadget Labs WavePRO ADAT Manual del usuario - Página 11

Navegue en línea o descargue pdf Manual del usuario para Tarjeta de sonido Gadget Labs WavePRO ADAT. Gadget Labs WavePRO ADAT 15 páginas. Option cards

Imprimir página

supports rates of 32 kHz, 44.1 kHz or 48 kHz. The ADAT option

card supports rates of 44.1 kHz or 48 kHz.

NOTE: All channels on the WavePRO interface must operate at

4. Set the bit-depth in the application to match the bit-depth of

the connected audio equipment. If the equipment is 16-bit,

the application should be set up to record and play 16-bit

samples.

If the audio equipment is 18, 20 or 24-bits, set the software

application to record and play 24-bits.

5. For SPDIF, make sure that the SPDIF mode is set correctly.

This setting is found in the WavePRO applet for the Windows

Control Panel.

6. Record or play audio using the same application functions that

are used for recording and playing audio with the other

WavePRO interface channels.

the same sample rate. For example, if you are trying

to record a track using the SPDIF input and the

application is not setup to record at the same sample

rate as your equipment, an error message saying,

"invalid sample rate" will be displayed.

When you add the

SPDIF option, another

setting will

automatically appear in

the WavePRO control

panel applet. The

setting allows you to

choose professional or

consumer mode and is

dependent on the

mode of the connected

equipment. Most SPDIF

equipment operates in

consumer mode (the

default).