Dymo LabelWriter 450 Duo Label Printer Manual de inicio rápido - Página 8

Navegue en línea o descargue pdf Manual de inicio rápido para Software Dymo LabelWriter 450 Duo Label Printer. Dymo LabelWriter 450 Duo Label Printer 20 páginas. Labelwriter series label printers
También para Dymo LabelWriter 450 Duo Label Printer: Manual de inicio rápido (20 páginas), Manual de inicio rápido (16 páginas), Visión general (2 páginas), Manual del usuario (19 páginas), Manual de inicio rápido (8 páginas), Manual de hardware (2 páginas)

Slide the spool guide onto the right side of the spool and press

the guide tightly against the side of the label roll, leaving no gap

between the roll and the spool. See Figure 6.

To ensure proper feeding of labels during printing, the

NOTE

label roll must fit snugly against both sides of the label spool,

with no gaps.

Insert the label spool into the left slot in the printer cover with the

labels extending from underneath the roll. See Figure 7.

Align the left edge of the label with the left edge of the label feed

slot and insert the label into the slot. See Figure 8.

The printer automatically feeds the label, stopping at the

beginning of the first label.

If the printer does not feed the labels, make sure the first label is

fully inserted and then press the form-feed button.

If the first label on the roll is not a full label, press

the form-feed button to eject the partial label.

Slide the label guide to the left until the label

guide aligns with the right edge of the label. See

Figure 8.

Make sure that the label guide does not pinch

the label.

Repeat steps 3-8 to load labels on the right side

of the printer.

Carefully lower the top cover.

Align labels

against left

edge

Figure 8

Figure 6

Figure 7

Slide label

guide against

labels