Adel Trinity 788 Manual de instrucciones - Página 8
Navegue en línea o descargue pdf Manual de instrucciones para Cerraduras Adel Trinity 788. Adel Trinity 788 12 páginas. Biometric fingerprint door lock
También para Adel Trinity 788: Manual de instrucciones (12 páginas)
Imprimir página
- 1. Table of Contents
- 2. Assignment of Fingerprint and Password
- 3. Initialization of the Door Lock
- 4. Enrollment of Master Fingerprints / Member Fingerprints
- 5. Setup of Spare Password
- 6. Deletion of Fingerprints
- 7. Deletion of Password
- 8. Daily Use State
- 9. Use of Emergency Key
- 10. Use of External Power
- 11. Change of Batteries
Trinity 788 Operation Manual
Notes:
1. The original password of the new lock (factory setting) is
password will be cleared at the time of the successfully enrollment of the master fingerprint
2. The spare password must be of 6 digits, which is an arbitrary combination of the figures
3. Only one spare password can be set for each lock, and with the code
password is the only password that can open the door, you can change it and delete it;
please refer to P.15 for deletion of password;
4. During the setting, the confirmed figure will be moved automatically to the tens place of the
LED, with the figure to choose and confirm at the ones place;
13
111111 , and this original
0~9 ;
99 . The spare
Trinity 788 Operation Manual
V. Deletion of fingerprints (take user 03
Operational procedure
Put the master finger that has been enrolled
on the fingerprint window and enter door open state
Press Button
-
to enter the deletion mode
Press Button +
or
-
to choose the first
digit
0
of the password code, and press
Button #
to confirm the choice
Continue to press Button
+
or
-
to adjust the seconddigit
3
of the
fingerprint code,and press Button # to confirm
Press Button
#
to reconfirm the fingerprint
code to be deleted, and the deletion of
the member fingerprint is completed
Notes:
1. Continue to input fingerprint code while the LED displays
deletion of other fingerprint;
2. The fingerprint codes
00-02 are master fingerprints, while 03-98 are member fingerprints;
3. The deletion of the member fingerprint can only be completed when its fingerprint code is available.
as an example)
Indication of the lock
Green light is on,
and the LED displays the code of the master fingerprint
The LED displays
0-
The LED displays the figure
0
just set which jumps
to the tens place, and the ones place displays
0
The LED displays the fingerprint code
03
and
flashes alternately.
The light on the fingerprint window flash one time
with a relatively sharp and quick beep, the LED
displays
0-
and stops display two seconds later
0- , and repeat the operation for
14