Active Products YE03 Manual del usuario - Página 3

Navegue en línea o descargue pdf Manual del usuario para Lavadora a presión Active Products YE03. Active Products YE03 10 páginas. 1450 psi electric pressure washer

Imprimir página
IMPORTANT PRECAUTIONS – READ FIRST
Warnings
When using this product, basic precautions should always be followed:
• Read all the instructions before using the product.
• Water spray must never be directed toward any electric wiring, devices or directly toward
the pressure washer machine itself, or fatal electric shock may occur.
• To reduce the risk of injury, do not operate the machine near children.
• Learn how to stop the machine and release pressure quickly. Be thoroughly familiar with
the controls.
• Stay alert—watch what you are doing.
• For use with cold water supply only. Do not draw other liquids.
• The pressure washer should not be used in areas where gas vapours may be present.
An electric spark could cause an explosion or fire.
• To minimize the amount of water getting into the pressure washer, the unit should be
placed as far as possible from the cleaning site during operation.
• Avoid accidental starts. Shut power "OFF" before connecting or disconnecting cord to
electrical outlets.
• Do not operate the product when fatigued or under the influence of alcohol or drugs.
• Do not stand on unstable surfaces. Stand with both feet balanced at all times.
• Prior to starting the pressure washer in cold weather, be sure ice has not formed on any
part of the equipment.
• Never carry your pressure washer by the cord.
• Do not pull on the cord to disconnect from the outlet.
• To allow free air circulation, the pressure washer should not be covered during operation.
• Keep operating area clear of people and pets.
• Follow the maintenance instructions specified in the manual.
if replacement of the plug or cord is needed, use only identical replacement parts.
• This product or its power cord contains lead, a chemical known to cause cancer, birth
defects or other reproductive harm. Wash hands after use.
Warnings
• Do not use with flammable liquids and toxic chemicals.
• Injection Hazard: Equipment can cause serious injury if the spray penetrates the skin.
• Do not point the gun at anyone or any part of the body. In case of penetration, seek
medical aid immediately.
• This system is capable of producing high pressure as rated in the Technical Specifi-
cations. To avoid rupture and injury, do not operate this machine with components
rated less than the unit itself (including but not limited to spray guns, hose and
hose connections).
• Before servicing, cleaning or removal of any parts, shut "OFF" power and
relieve pressure.
• Do not spray electrical apparatus and wiring.
• If connection is made to a portable water system, the system must be protected
against backflow.
3
IMPORTANT PRECAUTIONS – READ FIRST
WARNING - Risk of Injury
Do Not Direct Discharge Stream at Persons.
• High-pressure jet can be dangerous if misused.
• The jet must not be directed at persons, animals, electrical devices, or the unit itself.
WARNING - Risk of Explosion
• Do not spray flammable liquids.
• Do not use acids and solvents in this product.
• These products can cause physical injuries to the operator and irreversible damage
to the machine.
CAUTION - Gun Kicks Back
• Hold with both hands
• The trigger gun safety lock prevents the trigger from being engaged accidentally.
• The safety feature DOES NOT lock trigger in the ON position.
WARNING - Risk of Electric Shock
• Inspect cord before using - do not use if cord is damaged.
• Keep all connections dry and off the ground.
• Do not touch plug with wet hands.
• Do not use extension cords longer than 50' (15.2 m). Only use 12 or 14 AWG rated
extension cords.
Save These Instructions
In a double-insulation product, two systems of insulation are provided instead of
grounding. No grounding is provided on a double-insulated product, nor should a
means for grounding be added to the product. Servicing a double-insulated
product requires extreme care and knowledge of the system, and should be
done only by qualified service personnel.
Replacement parts of a double-insulated product must be identical to the parts they re-
place. A double-insulated product is marked with the words "DOUBLE INSULATION"
or "DOUBLE INSULATED" . The symbol " " may also be marked on the product.
4