Active Products RCP-C65B Manual del usuario - Página 8
Navegue en línea o descargue pdf Manual del usuario para Compresor de aire Active Products RCP-C65B. Active Products RCP-C65B 12 páginas.
Imprimir página[ACT 050] Manual E
4/4/06
INFLATION INSTRUCTION
HIGH-PRESSURE AIR COMPRESSOR
The Air Compressor has been specially
designed for simple and fast inflation of car
tires, bicycle tires, basketball, sporting equip-
ment, and party balloons. The air compressor
provides a small quantity of air at a relatively
high pressure.
INFLATING A CAR TIRE AND BICYCLE TIRE
1. Loosen the union valve from the air nozzle.
2. Insert the pressure gauge hose into
the air nozzle and tighten the union valve.
3. Screw the thread connector onto tire's
valve stem.
4. Press the trigger once for continuous
inflation.
5. Operate the air compressor until the
desired pressure is reached.
6. Pressure the trigger twice to stop inflation.
7. Remove the thread connector from the tire.
Note: To avoid over-inflation of tires, please
check the recommended car tire pressure in
the vehicle's owner's manual. For bicycle tire,
please check the tire marking.
CAUTION
Do not run the air compressor continuously for more than 15 minutes.
•
After each 15 minutes, allow it to cool for a minimum of 15 minutes.
Do not leave the air compressor unattended while in operation.
•
Keep out of reach of children.
Do not exceed maximum pressure of 150 psi.
•
The pressure gauge will provide an estimated reading only.
•
Please use a digital pressure gauge for more accuracy pressure information.
7
4:34 PM
Page 8
Balloon adapter
Ball adapter
INFLATING SPORTING EQUIPMENT
(I.E. BASKETBALL) OR PARTY BALLOONS
1. Loosen the union valve from the air nozzle.
2. Insert the ball/balloon adapter into the air
nozzle and tighten the union valve.
3. Insert the ball/balloon adapter into valve of
the object to be inflated.
4. Operate the air compressor until the object
is fully inflated.
5. Remove ball/balloon adapter from the
inflated object's valve.
Note: If a pressure reading is required during
inflation, use the pressure gauge hose provided.
Pressure gauge hose
A
Loosen
(counterclockwise)
B Tighten
(clockwise)
A
B