GRE PH54 Manual de instrucciones - Página 2
Navegue en línea o descargue pdf Manual de instrucciones para Equipos de iluminación GRE PH54. GRE PH54 14 páginas. Pool cover for above grou
Imprimir página
EN
Please read these Operating Instructions and the Safety Instructions carefully prior to using the article for the first
time.
Do not allow the folding rods to get into the hands of children. The individual segments of the rods are contracted
by a rubber strap. Children may easily get their fingers caught in there.
Be careful when erecting the pool cover. The rods are under tension. When you slide the pin into the rods, take
care not to get your fin-gers caught in them. It is best that two persons work together when the pool cover is
erected, on account of the size of the pool cover.
Delivery, Figure A –F
A Tarpaulin
B Cover for roof
C Steel poles
D Fibreglass poles
E Nail pegs
F Guy lines
Repair
Repair small leakages at the seams by means of seam sealant and at the pool cover fabric by means of
impregnation spray.
You can repair small holes or tears in the fabric by means of a suita-ble repair set for nylon/polyester fabric.
Cleaning
Use the usual commercial means of care for polyester fabric for the cleaning of the pool cover.
Do not wash the pool cover in the washing machine.
Do not have the pool cover cleaned by the dry-cleaner.
Mounting, Figure 1 – 17
ATTENTION!
The rooftop of the pool has to be removed by sudden growth of in-tense winds or storms. It is not designed for
these weather condi-tions. The attached storm tensioning in the scope of delivery provides only limited protection.
Strong wind or storm damage is excluded from warranty or guarantee claims.
Dismantling
Dismantling is carried out in the reverse order of assembly.
Packing and storing
Pack the components of the pool cover in a dry and clean condition to avoid the creation of mould. Allow the parts
to dry thoroughly if they have become wet during use.
Store the parts of the pool cover at a dry place. The fabric, the rods and zipper may be attacked by mould or
corrosion if stored in a wet condition.
When you are working with rods in general: When joining the com-ponents of the rods, take care that your fingers
will not be caught in them.
Fibre glass rods: The individual rods are under tension when you insert them into the second metal eye. Take
care that they do not spring out of your hand you might get hurt.
Erection rods: One of the ends of the erection rods is pointed. Take care that you do not hurt your eyes.
Note:
Ultraviolet Light Warning: This item is intended for occasional use and not for permanent or season-long use.
Continuous exposure will result in damage from Ultraviolet Light. UV damage is not coverey by manufacturer´s
warranty.