Gage Bilt GB568 Manual de instrucciones original - Página 14

Navegue en línea o descargue pdf Manual de instrucciones original para Herramientas Gage Bilt GB568. Gage Bilt GB568 16 páginas. Installation tool
También para Gage Bilt GB568: Manual de instrucciones original (20 páginas)

Gage Bilt GB568 Manual de instrucciones original
Approved for use on Gage Bilt CE installation tools and/or other manufacturer's CE approved tools of similar design.
FASTENER
NAS4445
NAS4450
GAGE BILT CERTIFIES THE GB568 WILL INSTALL THE ABOVE FASTENERS
GB910 POWERUNIT
(Sold Separately)
GB912 POWERUNIT
(Sold Separately)
GB568 INSTALLATION TOOL
GB568/GB568A ACCESSORIES
(Sold Separately)
NOSE ASSEMBLY SELECTION CHART
DIAMETER
5/32"
3/16"
1/4"
The GB910 Hydraulic Powerunit is a portable power source designed to operate a wide range
of hydraulic installation tools. The unit air powered, air actuated and delivers up to 10,000 psi
(689.48 bar) working pressure. The actuator on the installation tool remotely controls the hydraulic
oil directional flow. The unit consists of a two position air hydraulic pump, four way control
valve and relief valve mounted on the reservoir.
The GB910 Hydraulic Powerunit is available separately or in kits including hydraulic quick-
disconnect couplers, air connectors, air lines and hydraulic hoses in various lengths.
GB910-12 includes the GB910 and 12 ft. (3.7m) Hose Kit-Air, part #910701
GB910-26 includes the GB910 and 26 ft. (7.9m) Hose Kit-Air, part #910705
GB910-38 includes the GB910 and 38 ft. (11.6m) Hose Kit-Air, part #910709
GB910-52 includes the GB910 and 52 ft. (15.8m) Hose Kit-Air, part #910714
The GB912 Hydraulic Powerunit is a portable power source designed to operate a wide range of
hydraulic installation tools. The unit air powered, air actuated and delivers up to 10,000 psi
(689.48 bar) working pressure. The actuator on the installation tool remotely controls the hydraulic oil
directional flow. The unit consists of a two position air hydraulic pump, four way control valve and
relief valve mounted on the reservoir. The rapid tool piston movement is obtained through a higher
(12 cubic inches a minute) output pump. Quick disconnect hydraulic couplings and air control
socket are included to attach the equipment hydraulic hoses and air control tube.
The GB912 Hydraulic Powerunit is available separately or in kits including hydraulic quick-
disconnect couplers, air connectors, air lines and hydraulic hoses in various lengths.
GB912-12 includes the GB912 Powerunit and 12 ft. (3.7m) Hose Kit-Air, part #910701.
GB912-26 includes the GB912 Powerunit and 26 ft. (7.9m) Hose Kit-Air, part #910705.
GB912-38 includes the GB912 Powerunit and 38 ft. (11.6m) Hose Kit-Air, part #910709.
GB912-52 includes the GB912 Powerunit and 52 ft. (15.8m) Hose Kit-Air, part #910714
14
STRAIGHT
KS05-568-11
KS06-568-11
KS08-568-12
Images may not reflect actual tools
1/18 REV 10/21
Rev. 6/22