Gage Bilt GB2620PT Manual de instrucciones original - Página 7
Navegue en línea o descargue pdf Manual de instrucciones original para Herramienta eléctrica Gage Bilt GB2620PT. Gage Bilt GB2620PT 20 páginas. Installation tool
Imprimir página
When the installation tool is connected to a powerunit, operation is controlled by an electric actuator (240122) (GB2620PT) in the handle.
When the actuator is depressed, a directional valve in the powerunit directs oil to the front side of the piston forcing it and the nose
assembly collet rearward. This action causes the jaws to clamp onto the fastener pintail and pull the sheets together. The anvil is
forced forward, swaging the collar into locking grooves of the fastener. Further force breaks the pintail off, approximately flush with
the collar.
When the actuator is released the directional valve reverses oil flow to the back of the piston and pushes the nose assembly off of
the swaged fastener. The pintail ejector hydraulically pushes the spent pintail out of the nose assembly.
PULL Cycle
Actuator
(PULL)
Pressurized Oil
GB2620PT / GB2620PTA INTALLATION TOOL
PRINCIPLE OF OPERATION
HYDRAULIC DIAGRAM
Relief
Valve
(RETURN)
Unpressurized Oil
Pressurized Oil
Unpressurized Oil
Images may not reflect actual tool
Actuator
(PULL)
Unpressurized Oil
7
RETURN Cycle
Relief
Valve
(RETURN)
Pressurized Oil
REV. 9/18