Gage Bilt GB703SRVT Manual de instalación - Página 10
Navegue en línea o descargue pdf Manual de instalación para Herramienta eléctrica Gage Bilt GB703SRVT. Gage Bilt GB703SRVT 15 páginas.
Imprimir página
HEAD
WARNING:
Dispose of Hydraulic Oil in accordance with applicable regulations.
Remove nose assembly and adapter from tool before attempting disassembly of head cylinder assy (703134).
Remove end cap (703114). Push against threaded end of piston (703607) to slide it out of head cylinder assy (703134). Be careful not
to damage threads or cause burrs on polished piston rod surface.
The re-assembly sequence is the opposite of disassembly. (See Filling and Bleeding instructions.) Apply Loctite #242 and torque the
socket head cap screws (400061 and 400066) uniformly to 40 inch lbs. to prevent leakage around the gasket (704129).
703013 - DRAWBOLT EXTENSION
703007 - SLEEVE EXTENSION
703440 - GRIP
703134 - HEAD CYLINDER
ASSY
S832 - O'RING
704129 - GASKET
402482 - BUTTON
HEAD CAP SCREW
S572 - STAT-O-SEAL
744306
MANIFOLD-HEAD
ASSY
AIR ACTUATOR
CAP SCREW (2)
703011 - TUBE
70856 - JAM NUT
704130
ASSY
400066
SOCKET HEAD
400061
CAP SCREW (2)
SOCKET HEAD
S834 - O'RING
401089 - BACK-UP RING
S834 - O'RING
401816 - PLUG
204304 - SWIVEL ASSY
(INCLUDES 401080 & 403764)
A-336
HYDRAULIC HOSE
724017 LEVER
ASSY
S572 - STAT-O-SEAL (2)
10
S829 - O'RING
400788 - O'RING
405865 - POLYSEAL
703607 - PISTON
204304 - SWIVEL ASSEMBLY
401080 - BACK-UP RING
703563 - HOSE GUARD (NOT SHOWN)
704305 - AIR LINE
A-144 - HOSE CLAMP (2)
S1181 - BARBED FITTING (2)
A-663 - HANGER
744303 - MANIFOLD-HANDLE
402482
BUTTON HEAD
CAP SCREW (2)
703114 - END CAP
400788 - O'RING
403764 - O'RING
9/14