Gage Bilt GB7624 Manual de instrucciones original - Página 4

Navegue en línea o descargue pdf Manual de instrucciones original para Remachadoras Gage Bilt GB7624. Gage Bilt GB7624 20 páginas. Hydraulic tool
También para Gage Bilt GB7624: Instalaciones (9 páginas)

Imprimir página

WARNING:

Any other use is forbidden.

The GB7624 (electric operated) and the GB7624A (air operated) are hydraulic installation tools capable of installing 5/8" and 3/4" standard

lockbolts. They weigh 15 lbs. (6.8 kg) and can be operated in any position. They have a 1.970" (50.0 mm) fastener setting stroke and a

rated pull load of 40,000 lbs. (177.9 kN).

The GB7624 (electric actuated) installation tool is designed to operate at pressures up to 10,000 psi (689.5 bar) on hydraulic pressure

developed by the GB940 Powerunit. Normal operating pressure is set at 10,000 psi (689.5 bar) maximum PULL pressure and 6,000 psi (413.7 bar)

maximum RETURN pressure, enabling the tool to pull all the fasteners listed on the selection chart without adjusting pressures. Tool

operates with an electric actuator to pull fastener.

The GB7624A (air actuated) installation tool is designed to operate at pressures up to 10,000 psi (689.5 bar) on hydraulic pressure developed

by the GB910 & GB912 Powerunits. Normal operating pressure is set at 10,000 psi (689.5 bar) maximum PULL pressure and 6,000 psi

(413.7 bar) maximum RETURN pressure, enabling the tool to pull all the fasteners listed on the selection chart without adjusting pressures.

The powerunit may be set to the pressures only needed to pull your specific fastener using pressure gage assembly (942280) and setting

pressures to amounts shown on the selection chart. The tools come equipped with the 24" hoses. Tool operates with an air actuator

to pull fastener.

ALL GAGE BILT HYDRAULIC INSTALLATION TOOLS ARE COMPATABLE WITH HUCK® POWERUNITS. NOSE ASSEMBLIES ARE NOT

FURNISHED WITH THESE TOOLS AND MUST BE ORDERED SEPARATELY.

WARNING:

Do not operate in an explosive atmosphere.

The GB7624 and GB7624A can be operated between 0ºF - 118ºF (-17.8ºC / 47.8ºC)

GB7624 S/N: 1140 AND ABOVE

PLEASE CONTACT GAGE BILT FOR ALL OTHER SERIAL NUMBERS.

DESCRIPTION

ENVIRONMENTAL USE

SPECIFICATIONS

Weight

Max Hyd. Pressure Req'd.

Hyd. Power Source

Hydraulic Oil

Setting Stroke

Rated Pull Load

- 15 lbs. (6.8 kg)

- 10,000 psi (689.5 bar) MAX PULL

6,000 psi (413.7 bar) MAX RETURN

- GB940 Powerunit or equivalent.

- Fire resistant hydraulic oil conforming with

OSHA regulation 1926.302.

- 1.970" (50.0 mm)

- 40,000 lbs. (177.9 kN)

Rev. 4/22