HI-E DRY 195 Instrucciones de instalación, uso y mantenimiento
Navegue en línea o descargue pdf Instrucciones de instalación, uso y mantenimiento para Deshumidificador HI-E DRY 195. HI-E DRY 195 10 páginas.
Imprimir páginaHI-E DRY 195 Installation, Operation & Service Instructions
Table of Contents
1. Specifications ........................................................1
2. Installation ............................................................
2. Location .........................................................
2.A In humid area, no ducting. .........................
2.B In humid area, duct inlet and/or outlet. ......
2.C In remote area, duct inlet & outlet. ............2
2.D In remote area, duct outlet only. ................2
2.E In remote area, duct inlet only. ..................2
2.2 Electrical Requirements ...................................2
2.3 Condensate Removal ......................................2
2.4 Ducting ..........................................................2
2.4A Optional Ducting kit ..................................2
2.4B Ducting for Dehumidification .....................2
2.4C Ducting for Fresh Air .................................2
2.5 Optional Remote Humidity Control ....................3
2.6 Hard Wiring The HI-E Dry 95 ...........................3
3. Operation .............................................................4
3. Humidity Control Adjustment ............................4
3.2 Fan Switch ......................................................4
3.3 Defrost Control Adjustment ..............................4
3.4 Low Pressure Control .......................................4
4. Maintenance .........................................................5
4. Air Filter ..........................................................5
5. Service .................................................................5
5. Warranty .........................................................5
5.2 Technical description .......................................5
5.3 Troubleshooting ...............................................5
5.4 Refrigerant Charging ........................................6
5.5 Blower Replacement ........................................6
5.6 Compressor/Capacitor Replacement ................6
5.6A Checking Compressor Motor Circuits .........6
5.6B Replacing a Burned Out Compressor .........7
5.7 Low Pressure Control .......................................7
5.8 Relay ..............................................................7
5.9 Humidity Control..............................................7
5.0 Defrost Thermostat & Timer ...........................8
5. Condensate Pump .........................................8
6. Wiring Schematic ..................................................8
7. Service Parts List ..................................................9
8. Warranty .............................................................
Serial No. __________________________________
Purchase Date ______________________________
Dealer's Name ______________________________
Specifications subject to change without notice.
Toll-Free -800-
-
Phone
www.
Read the installation, operation and service instructions
carefully before installing and using this unit. Proper
adherence to these instructions is essential to obtain
maximum benefit from your HI-E Dry 95 Dehumidifier.
1 Specifications
Model: HI-E DRY 95
Electrical: 0-20 VAC, 2.0 Amps, grounded
Compressor LRA: 64.5 Amps
Capacity: 84 pints/day @ 80°F, 60% RH
Air Flow: 540 CFM without external ducting
50 CFM @ .5 IWG external static
Refrigerant Charge: 2 lbs., 3 oz. R-22
Optional Duct Connections: 2" round inlet & outlet
Size (w/o duct collars): 36.5" long x 9" wide x 40" high
Weight: 80 lbs.
2 Installation
2.1 Location
The HI-E Dry 95 can be installed in a variety of locations
to meet the owner's needs as listed below. In all cases,
keep the following cautions in mind:
• If used near a pool or spa, be certain there is NO
chance the unit could roll into the water or be
splashed and that it is plugged into a GROUND FAULT
INTERRUPTER.
• DO NOT use the HI-E Dry 95 as a bench or table.
• Avoid discharging the air directly at people, especially
in pool areas.
2.1A In Humid Area, No Ducting
The simplest installation is to place the HI-E Dry 95
in the humid area with no ducting. The air inlet & outlet
must be at least ' from walls and other obstructions to
airflow.
2.1B In Humid Area, Duct Inlet and/or Outlet
If the humid area is very large or has high ceilings,
dehumidification can be improved by adding an inlet and/
or outlet duct to circulate and destratify stagnant areas.
For a large area, add inlet or outlet ducting to create flow
across the area's greatest length.
For areas with ceilings higher than 2', use an inlet
duct to draw warm, moist air from near the ceiling. See
section 2.4 for attaching duct collars & ducting.
• Toll-Free -800-
.com •
@
.com
TS-232D-0/06
-