65 AMPS Ventura Manual del usuario - Página 2

Navegue en línea o descargue pdf Manual del usuario para Amplificador para instrumentos musicales 65 AMPS Ventura. 65 AMPS Ventura 3 páginas.

Tubes:

The Producer tube complement consists of two 6v6

tubes.

Channels:

The Producer has two channels, The Color Channel

and the Bump circuit, totaling to four voices that are all

accessible through a standard 2-button foot-switch.

Master Voltage

Our master voltage emulates the tonal response of a

big amp only at low volumes. The "Master Voltage"™

knob reduces the B+ voltage and output in the amp in

a unique way that keeps the internal tube relationships

perfect while keeping the filament voltage up. After

seeing all other power schemes' shortcomings, we've

come at this from a different angle and we're very

pleased with the results. You can dial this amp down to

3 watts output WITHOUT losing tone, feel, vocabulary,

authority, etc.

FX Loop - The passive effects loop comes out on a pair

of jacks, allowing the user's own effects to be added

after the preamp stage.

Bump Control

The Bump™ control is a much more effective alterna-

tive to traditional channel switching. The Bump™ al-

lows the user gain-up and re-slope the amp's tone stack

allowing much more midrange to flow through the

circuit; thereby gaining up the entire amp naturally and

not inducing false preamp gain that creates fizz and

buzz. The end result is the effect of having two amps in

one.

65amps VENTURA FRONT PANEL

Tone controls:

The Tone control for the channel is passive cut-style.

We recommend starting at "10" and backing off.

With brighter single-coil guitars, the mid's will focus

really well with the TONE set back around "5 to 8".

ON/Standby - Best to turn the POWER switch on

first before the Standby and wait about 10 seconds

before turning Standby on. This will prolong tube

life. When turning the amp off, turn POWER switch

off first. This allows the power to drain out of the

amp circuit. You can turn off the Standby switch later

before turning the amp back on.