AirComfort CAMP MATE 6302QRB Manual del producto - Página 5
Navegue en línea o descargue pdf Manual del producto para Mobiliario interior AirComfort CAMP MATE 6302QRB. AirComfort CAMP MATE 6302QRB 6 páginas. Queen raised air mattress
También para AirComfort CAMP MATE 6302QRB: Manual del producto (4 páginas), Manual de instrucciones (2 páginas)
Imprimir página
ASSEMBLY INSTRUCTIONS
SETTING UP / STORING
AWAY
INFLATING:
Check your surroundings for any sharp objects on the
1.
ground/floor that may cause damage to the bed (nails,
screws, sharp rocks, etc.)
Unfold the bed and lay it flat on the floor.
2.
Locate the nozzle caps and choose the appropriate cap
3.
to inflate the air bed.
Attach to the INFLATE opening of the battery pump.
4.
Open the valve cover and insert the battery pump until
5.
snug.
Press the power switch on the side of the pump and
6.
inflate.
Once it is firm, turn off the pump and quickly close the
7.
valve to avoid losing any air.
DO NOT OVERINFLATE. INFLATE UNTIL THE WRINKLES ARE
ALMOST GONE, AND THE MATTRESS IS FIRM.
DEFLATING:
1. Open the valve cover of the air mattress to let the air
out.
2. Fold the air mattress in half to help accelerate
deflation.
3. Once most of the air has deflated from the bed, locate
the nozzle caps and choose the appropriate cap to
attach to the opening of the pump.
4. Insert the pump into the valve until snug.
5. Press the power switch on the side of the pump to
deflate the rest of the air inside the bed.
6. Once all the air has been removed from the bed, turn
off the pump and quickly close the valve.
7. Fold the bed, place it inside the storage bag and store
safely.
MODEL# 6302QRB
Youtube Assembly Video:
https://www.youtube.com/watch?v=zbRWkvcG-ig
Proper inflation of the air mattress:
• The ambient temperatures of air have an effect on the airbed
internal pressure. At low ambient temperature the air will contract
within the airbed and the airbed will feel softer: add air as
necessary.
• At high ambient temperature the air within the airbed will expand
significantly and the airbed will become hard and may burst:
release air to avoid damage to the airbed or to soften the feel.
• Do not expose the airbed to extreme temperatures (hotor cold).
• Stretching is a natural characteristic of new vinyl. During initial
use, the airbed may become soft and require additional inflation
to maintain desired firmness. This is normal for the first few days
of use.
• Dimensions shown are approximate and will vary due to the vinyl
temperature and the air temperature.
• In no event shall Air Comfort, their authorized agents or
employees be liable for damages (such as pin holes) to the
airbed caused by negligence, ordinary wear and tear, abuse and
carelessness, or external forces.
5