Dyna-Lite RP400 Manual de instrucciones - Página 6

Navegue en línea o descargue pdf Manual de instrucciones para Fuente de alimentación Dyna-Lite RP400. Dyna-Lite RP400 12 páginas.

MP400/MP800

MP1600/SP16

Power Packs

1. AC On / Off Power Switch - Turns power

pack on and off.

2. Two stop Variator Conrol - Fine-tune your

power settings in 0.2 stop detented incre-

ments. Used in combinations, the power

control switches and Variator provide a total

of 18 different power settings with a single

flash head, going as low as 15 watt/

seconds.

3. Power Control Switches – Three position

full/half/quarter power switches provide

power settings over a three stop range per

channel. (These can be trimmed using the

Variator or combined using the Ratio output

switch.)

4. Proportional Modeling Light Controls-Five

position proportional modeling light switch

allows you to control the ratio of your

modeling light for pre-visualization. Flash

head fans always run at full speed re-

gardless of switch position.

5. Flash Head Outlets – The pack is capable of

accepting up to four heads and each is outlet

is arc protected. This means that it is

completely

to plug and unplug flash head cables into the outlets even while the pack is on.

6. Modeling Light Delay Circuit - (

is especially useful when you are dragging the shutter so the modeling lights will not effect exposure. It also redirects the power

from the pack when recycling as the modeling lights draw an additional 2 amps of power each.

7. AC Power Cord Socket and Circuit Breaker - Offers easily reset-able protection.

8. Ratio/Combined Output Switch - An indicator light tells you whether your power is routed symmetrically or asymmetrically

between the "A" and "B" flash head outlet banks.

9. Ready Light/Test Switch - When lit the pack is fully charged. This button can also be used to manually trigger the pack.

10. Sync, WEIN slave-eye and Pocketwizard selector switch - Can be triggered by sync cord, any flash and will also respond to

most infrared triggers or optional Pocketwizard radio slave.

11. Audible Ready Indicator Switch- Get audible confirmation that the pack is fully recycled to full power.

5 .

safe

) Delays the modeling light from coming back on after flash for 1, 2, 4 or 8 seconds. It

SP1600 only