Gaggenau GF 111 70 Manual de instalación - Página 4

Navegue en línea o descargue pdf Manual de instalación para Horno Gaggenau GF 111 70. Gaggenau GF 111 70 12 páginas.

Imprimir página

1. Check filter parts: filter cartridge, filter head with wall

mount and hose with two gaskets.

2. Shut off power.

3. Shut off water supply externally.

4. Attention: Pay attention to the direction of the water flow

when mounting the hoses:

Please see filter head „IN" = water inlet „OUT" = water

outlet

5. Mount inlet hose with gaskets to your cold water supply

and the other side to the IN inlet at the filter head. Mount

the outlet hose to the OUT outlet of the filter head and to

your steamer.

6. Remove the protective cap (1). Make sure not to touch the

cartridge head. Insert the filter cartridge (4) vertically into

the filter head (2). The filter cartridge can only be inserted

when the locking handle is open.

7. Turn the locking handle (3) until you feel it engage. Place a

bucket under the grey hose and push the button (5) at the

filter head to remove air from the cartridge (flush 2l).

8. The P1000 filter cartridge can be operated vertically or

horizontally.

9. Optional: Attach the wall mount in place using two match-

ing screws and two wall plugs if necessary, depending on

the type of wall. Engage the filter head in the wall mount.

Please use the fixation holes.

10. Turn on water supply and switch on power.

11. Check complete system for any leaks. If any leaks are

found, repeat necessary steps.

12. When everything is in order, the steam oven is ready for

use with the MAVEA filter. If any problems occur, contact

your Gaggenau service team.

Attention:

1. Protect the P1000 water filter cartridge from direct

sunlight and mechanical damage. Do not assemble near

sources of heat and open flames. A stop valve must be

installed before the filter system intake hose. If the water

pressure is greater than 125 psi, a pressure reducer must

be installed in front of the filter system. Do not use aggres-

sive cleaning fluid.

2. The P1000 filter cartridge is only suitable for domestic

use.

3. Only water of drinking water quality may be used as intake

water for the MAVEA water filter system. The MAVEA water

filter system is only suitable for cold water use within the

supply water temperature stated in the technical data. No

microbiologically impaired water or water of unknown

quality may be used.

4. If there are official instructions to boil tap water, the filter

system must be decommissioned. When the requirement

to boil water comes to an end, the filter cartridge must be

replaced and the connections cleaned.

5. The filter system must not be opened or dismantled during

operation. The filter cartridge must not be opened. The

filter system is designed for a service life of 5 years

counted from the date of installation. After five years the

filter head needs to be exchanged.

An independent institute certifies the food grade quality of

MAVEA water filter products.

Exclusion of liability

MAVEA shall not be held liable for any damage, including

subsequent damage, arising from the incorrect use of the

product.

Technical data

Operating pressure

Water intake temperature

Ambient

temperature for

Rated service flow

(acc. to DIN 18879/NSF Std 42)

Pressure loss at nominal service flow

Empty filter cartridge volume

Weight (dry/wet)

Dimensions

(Width/Depth/

Height)

Operating position

Water inlet connection

Water outlet connection

25 psi to max.

125 psi,

2 kg/cm

8.8 kg/cm

39°F to 86°F /

4°C to 30°C

operation

39°F to 104°F /

4°C to 40°C

storage/transport

-4°F to 122°F /

–20°C to 50°C

0.25 Gal/min

2.9 psi/

0.2 kg/cm

0.26 Gallon

2.2 lb/3.1 lb

Filter system

4.6"/4.3"/10.4"

(filter head with filter

cartridge)

Filter cartridge

4.3"/4.3"/10.2"

Installed dimensions

5.4"/5.1"/10.4"

(vertical installation

with wall mounting

bracket)

Horizontal and

vertical

3/8" BSP

to max.