Agrident APR500 Manual - Página 9
Navegue en línea o descargue pdf Manual para Escáner Agrident APR500. Agrident APR500 14 páginas. Weight from scale
También para Agrident APR500: Manual (9 páginas)
Imprimir páginaAPR500 – Weight from scale
Press Hotkey A in order to initiate an EID scan. This display shows:
If a transponder was read successfully, the following screen is displayed:
The first line shows the EID in a larger font size. The BT symbol on the right side indicates
that there is an active Bluetooth connection. The second line states that the scale type is
configured to Iconix and the third line that the scale should be connected via Bluetooth.
From the last line you can see that you have to press
The display shows:
If the weight was requested successfully, the following screen appears:
You can confirm the weight with
button in order to request the weight again. If you confirm the weight, the following
information screen will be displayed:
The first line shows the weight, the second the EID, the third the information "stored" and
the last one the number of stored datasets and the remaining memory capacity.
If the APR was not able to receive the weight, the following error message will occur:
Then the reader returns to the previous screen:
Please check the serial connection again and make sure that the scale settings of the
APR500 are correct.
09.03.2011
in order to request the weight.
or go back to the previous screen using the
Page 9 of 14