Great Lakes GL840N12-3042-SA Manual de instrucciones de instalación - Página 3
Navegue en línea o descargue pdf Manual de instrucciones de instalación para Recinto Great Lakes GL840N12-3042-SA. Great Lakes GL840N12-3042-SA 16 páginas. Nema enclosures
Imprimir páginaWHAT'S INCLUDED
• NEMA unit (assembled)
• 3/8" SQ. hole mounting rails (includes M6 cage nuts and 12mm
long screws)
NEMA weight capacity: 2000 lbs.
INSTALLATION
Receiving, Unpacking, and Removing the NEMA Enclosure
from the Pallet
Inspect and report any damage before receiving. Unpack the enclosure
by carefully removing the corrugated carton and corners. Avoid
damaging the enclosure when removing packaging.
WARNING: Only trained service personnel should be used to remove
the enclosure from the pallet. Also, be sure you have a sufficient
number of service personnel. Do not attempt to move enclosures
by yourself.
WARNING: Be careful when moving enclosures before installation.
Sudden stops and starts, excessive force, obstructed routes, and
uneven floor surfaces may cause the enclosure to topple over.
Loading Equipment
WARNING: Only install equipment after the NEMA Enclosure has been
properly secured. Do not move the NEMA Enclosure assembly while
loaded.
Once in place at the desired/intended location, deploy the leveling feet
for maximum stability.
Rated or maximum load capacity for the NEMA Enclosure is 2000
pounds on the floor.
To maintain a uniform distribution of the mechanical load in the NEMA
Enclosure, load the heaviest equipment first, at the bottom of the
NEMA Enclosure and load the lighter units at the top.
3