Daxten SCOUTKVM Manual de instalación - Página 4

Navegue en línea o descargue pdf Manual de instalación para Interruptor Daxten SCOUTKVM. Daxten SCOUTKVM 7 páginas. Soho kvm switches
También para Daxten SCOUTKVM: Folleto (2 páginas)

Imprimir página

Installation

Before connecting your computers and console devices to the SCOUTkvm switch, please ensure that

all devices are powered off. Connecting devices while powered on may lead to damage to your

computers or the SCOUTkvm. Daxten cannot be held responsible for damage caused by connecting

devices that are powered.

Place the SCOUTkvm switch in a convenient location; its small size makes it easy to place it

on the desktop.

Connecting the console devices:

2.1.

Connect your monitor's HD 15-pin connector to the SCOUTkvm's Monitor 'CONSOLE'

device on the rear panel.

2.2.

Connect your PS/2 keyboard to the PS/2 keyboard connector (purple) and your PS/2

mouse to the PS/2 mouse connector (green) on the rear panel of the SCOUTkvm.

Connecting the computers with PS/2 ports via the SCOUT KVM cable:

3.1.

Connect the DB 15-pin male connector to the next free PC port on the rear panel of

the SCOUTkvm (labelled PC1, PC2...).

3.2.

Connect the blue HD 15-pin male connector to the VGA port on your computer.

3.3.

Connect the purple PS/2 (6-pin MiniDIN) keyboard connector to the PS/2 keyboard

port on your computer. NOTE: for USB ports, please see Step 4

3.4.

Connect the green PS/2 (6-pin MiniDIN) mouse connector to the PS/2 mouse port on

your computer. NOTE: for USB ports, please see Step 4

Connecting the computers with USB ports via the SCOUT KVM cable:

4.1.

Connect the DB 15-pin male connector to the next free PC port on the rear panel of

the SCOUTkvm (labelled PC1, PC2...).

4.2.

Connect the blue HD 15-pin male connector to the VGA port on your computer.

4.3.

Connect the PS/2 keyboard connector (purple) to the Daxten PS/2 to USB adaptor.

4.4.

Connect the PS/2 mouse connector (green) to the Daxten PS/2 to USB adaptor.

4.5.

Connect the USB connector to a USB port on your computer.

Power up the computers. The computer connected to the first port will be shown on the

monitor. You may check if the keyboard and mouse work after the system has booted up. If

this is OK, use the Select button to select the following computers to verify keyboard and

mouse functionality. If you find that the keyboard or mouse are not working correctly please

verify that all cables are properly connected.

Using the SCOUTkvm

The SCOUTkvm provides two possibilities to select the desired computer. You may use either the

Select button on the unit, or make use of the keyboard Hot Key commands.

You may notice that the mouse cannot be used for around 2 seconds when the SCOUTkvm switches

to another computer. This is normal and is caused by the synchronization process which ensures that

the mouse operates correctly.

Selection buttons

2 Port: Pressing the Select button on the front panel cycles through computers 1 ~ 2.

4 Port: Pressing the individual PC buttons will switch the signal to the desired computer.