Great Little Trading Whittington Desk & Hutch Manual de instrucciones de montaje - Página 7
Navegue en línea o descargue pdf Manual de instrucciones de montaje para Mobiliario interior Great Little Trading Whittington Desk & Hutch. Great Little Trading Whittington Desk & Hutch 14 páginas.
Imprimir página
Assembly: Desk with Drawer
FRONT
#9
#6
Hardware for Step 7:
screw 16mmL
4x #6 15mm Screws
2x #9 Flat Runners
HOLE GUIDE
BACK
FRONT
A
STEP 7:
Take the desk top (A) and lay it upside-down on a
clean, dry and smooth surface.
Attach the flat runners (#9) to the inside drawer
holding supports on the underside of the desk top
as shown, using 2 x 15mm screws for each runner
(see hole guide above).
Please note: The wheel of the drawer runners
should be at the front of the desk top, next to the
opening where the drawer will be inserted.
BACK
Hardware for Step 8:
8x #4 45mm Bolts
8x #7 Washers
8x #8 Split Washers
7
B
#7
#8
#4
STEP 8:
The legs of the desk can now be attached. Take each
45mm bolt (#4) and thread on a split washer (#8)
first followed by a flat washer (#7). Use 2 x bolts and
washer sets for each leg (B).
Please note: When screwing in the pairs of bolts,
for smoother insertion do not screw one individual
bolt all the way in, but instead alternate securing each
of the bolts until they are completely secure and as
tight as they can possibly go.