Gaggenau AC231120 Manual de instrucciones - Página 6
Navegue en línea o descargue pdf Manual de instrucciones para Campana de ventilación Gaggenau AC231120. Gaggenau AC231120 16 páginas.
Imprimir página
Operating the appliance
Note: Switch on the extractor hood when you start
cooking and switch it off again several minutes after you
have finished cooking. This is the most effective way of
removing the kitchen fumes.
Controls
Use the remote control to set and adjust the various
different functions of your appliance.
Note: The remote control requires AAA/LR03/1.5 V
batteries. Refer to the
Changing the batteries in the remote
section for instructions on how to insert the
control
batteries.
Note: Point as accurately as you can with the remote
control to the infrared receiver on the extractor hood's
control panel.
Note: Heat and penetrating moisture may damage the
remote control. Never expose the remote control to
intense heat or moisture.
Remote control
Operating buttons
Button
Explanation
K
Switches on the run-on function/intermittent
function
@
Increases the fan setting
¶
Switches the extractor hood on and off
<
Switches the lighting on and off
A
Reduces the fan setting
†
Switches on intensive mode
6
Extractor hood's control panel
(
Operating buttons
0
Infrared receiver
Operating buttons
Button
Explanation
#
Switches the extractor hood on and off
1, 2, 3
Switches on power setting 1, 2, 3
Ž
Switches on intensive mode
ž
Switches on the run-on function
μ
Switches on the intermittent function
ž
Switches the lighting on and off
Switching the appliance on and off
Note: Always adjust the setting according to the current
conditions. To eliminate strong cooking smells, select a
high fan setting.
Switching on the appliance
Press the ¶ button on the remote control or the
#
button on the extractor hood's control panel.
The extractor hood starts at power setting 1.
Button 1 lights up if fan setting 1 has been selected.
Selecting the fan setting
@
A
Press the
or
button on the remote control or
button 1, 2 or 3 on the extractor hood's control panel to
set the power setting you require.
Button 1 lights up if fan setting 1 has been selected.
Button 2 lights up if fan setting 2 has been selected.
Button 3 lights up if fan setting 3 has been selected.
Switching off the appliance
Press the ¶ button on the remote control or the
#
button on the extractor hood's control panel.