CEG ECO-MXA 404 Manual de instrucciones de instalación y funcionamiento - Página 14

Navegue en línea o descargue pdf Manual de instrucciones de instalación y funcionamiento para Bomba de agua CEG ECO-MXA 404. CEG ECO-MXA 404 20 páginas. Multi-stage water pump with electronic press control

Imprimir página
ELECTRONIC PRESSCONTROL PC-1100

PRODUCT DESCRIPTION

PRESSCONTROL is a device that guarantees optimal control of pumps for domestic use. Deriving from
a hydraulic and electronic logics project for the Australian and New Zealand market, it is capable of
simultaneously detecting both the pressure and the flow, as well as automatically managing the pump
operation. It replaces the traditional pressure controller and pressure tank, protecting the pump in the
case of water shortages. PRESSCONTROL:
- Starts and stops the pump in accordance with the opening and closing of the taps
- Maintains constant pressure during delivery
- Stops the pump in the case of water shortage, protecting it from dry running
- Maintenance-free

TECHNICAL DATA

Water temperature range min / max
Ambient temperature
Max. working pressure
Start pressure
Inlet/outlet pipe connection
Max particle size
Electrical supply
Electrical connection
Max current
Software version

UNIT STARTING AND WORKING

14
Every care has been taken to ensure the accuracy of the information contained in this publication, but due to continuous development and improvement the right is reserved to supply products
which may differ slightly from those illustrated and described in this publication.
5°C - 40°C
0°C - 50°C
10 bar
1.5 bar
25 mm BSP / 1" Inch BSP
1 mm (non-abrasive material)
220V - 240V, 50 Hz
AS/NZ plug fitted to 1.5m lead
10 A
4.0
Power on
Pump on
Failure
ELECTRIC MOTORS AND PUMPS
Restart
Inlet
Table 6.0
Power
I N T E G R AT E D
INTELLIGENCE
INTEGRATED
INTELLIGENCE