Gaggenau VG 491 211 AU Manual de instrucciones - Página 9

Navegue en línea o descargue pdf Manual de instrucciones para Placa Gaggenau VG 491 211 AU. Gaggenau VG 491 211 AU 16 páginas.

Imprimir página

Individual parts of the wok burner

Ensure that the individual parts of the wok burner are

fitted in the correct position and are straight; otherwise,

this may result in ignition problems or problems during

operation. Fit the burner head such that the

thermocouple is positioned in the corresponding recess

on the burner head. The lug on the burner ring must

engage in the corresponding recess on the burner

head.

Note: If the burner parts are fitted at an angle, the

appliance will not work.

(

Burner cap

Burner ring

Burner head

Thermocouple

Ignition plug

Operating the appliance

N otes

O p e r a t i n g t h e a p p l i a n c e

–

Only use the accessories specified. Do not line the

stainless steel recess (e.g. with aluminium foil).

–

The burner and ignition plug must be clean and dry.

–

Only light the hotplates if the pan supports and all

burner parts are correctly fitted.

–

When one burner is ignited, an ignition spark will

also be generated at all the other burners.

–

Do not touch the ignition plug while the gas

appliance is being lit.

–

It is important to keep the appliance clean. If the

ignition plugs are dirty, this may cause ignition

problems. Clean the ignition plugs regularly with a

small, non-metallic brush. Take care to prevent the

ignition plugs from suffering any heavy knocks.

–

When you cook using a wok, place the wok ring

onto the pan support over the wok burner. Make

sure that the wok is stable on the wok ring when

you are cooking.

–

When you switch from setting 3 to setting 4 or

higher, the burner will briefly switch to its maximum

output. This is to optimise ignition between the

burner rings.

–

Do not cover the ventilation openings on the rear of

the gas hob.

–

When the gas cooktop is switched on, the

electronics open up the gas supply, which

produces a short sound. This is normal.

–

In the event of a power failure, the appliance will

not work. The gas supply is shut off.

Abnormal operation

Flames are usually blue and sharply defined. If the

flames are yellowish or noisy or if the gas does not

ignite within the period specified under "switching on"

abnormal operation is indicated. Refer to chapter "After-

sales service" of this manual for service contact details.

Operating the appliance