Dynabrade 65016 Manual de seguridad, funcionamiento y mantenimiento - Página 6

Navegue en línea o descargue pdf Manual de seguridad, funcionamiento y mantenimiento para Amoladora Dynabrade 65016. Dynabrade 65016 16 páginas. Electric tool post grinder 2 inch x 36 inch abrasive belt machine

Imprimir página

MACHINE OPERATION

WARNING Death or serious injury can occur from deflagration if operated in a Class 1 or Class 2 haz-
ardous area. The 2" x 36" Electric Tool Post Grinder is not rated for use in Class 1 or Class
2 hazardous areas and could ignite hazardous gas or dust.
WARNING Death or serious injury can occur from deflagration if ferrous and non-ferrous grinding dust
is mixed. Always clean interior and exterior of 2" x 36" Electric Tool Post Grinder between
grinding or polishing ferrous and non-ferrous material.
CAUTION Injury from crushing or cutting is possible if the 2" x 36" Electric Tool Post Grinder is used
without guards in place. Never use without guards.
CAUTION Injury from impact or crushing is possible if adjustments or abrasive belt changes are made
while the lathe is on and the work piece is moving. Always make adjustments and abrasive
changes with the lathe turned off.
CAUTION Injury from crushing or cutting is possible if the 2" x 36" Electric Tool Post Grinder starts
unexpectedly. Always unplug from electric power and compressed air when not in use.
CAUTION Permanent hearing loss is possible if exposure to sound exceeds the limits of Federal,
State or local statutes, ordinances and/or regulations. Wear hearing protection.
CAUTION Eye injury from grinding particles is possible when using abrasive power tools.
Eye protection conforming to ANSI Z87.1 must be worn at all times.

MAINTENANCE

CAUTION Injury from crushing or cutting is possible if the 2" x 36" Electric Tool Post Grinder starts
unexpectedly. Always unplug from electric power and compressed air when performing
maintenance.
CAUTION Injury from slip or fall is possible if floor is wet.

TROUBLESHOOTING

DANGER
Death or serious injury will occur from electrocution or arc flash after direct or indirect contact
with live parts. Disconnect electric power before accessing controls.
CAUTION Injury from crushing or cutting is possible if the 2 x 36 Electric Tool Post Grinder starts unex-
pectedly. Always disconnect from electric power and compressed air when troubleshooting.
6