Dynabrade 13450 Manual de seguridad, funcionamiento y mantenimiento - Página 8
Navegue en línea o descargue pdf Manual de seguridad, funcionamiento y mantenimiento para Herramientas Dynabrade 13450. Dynabrade 13450 8 páginas. 1hp right-angle. governor controlled 2,800 rpm and 2,800 rpm, versatility kit
Imprimir página
96005 Male Plug
•
Provides up to twice the air flow
compared to standard plug design.
•
Plug has "ported" design to prevent
"starving" of the air tool.
®
Dynaswivel
•
Swivels 360° AT TWO PIVOT POINTS allowing the air hose to
drop directly to the floor while providing superb tool handling.
95461 – 3/8" NPT
Dynabrade Angle Gear Oil
•
Specifically formulated to saturate wick system in right
angle gear head.
95848: 2 oz. tube
95541: Push-type Gear Oil Gun
95542 Grease 10 oz.
•
Multi-purpose grease for all types of bearings, cams, gears.
•
High film strength; excellent resistance to water, steam, etc.
•
Workable range 0˚ F to 300˚ F.
95541 Push-type Grease Gun
•
One-hand operation.
Dynabrade Air Lube
•
Formulated for pneumatic equipment.
•
Absorbs up to 10% of its weight in water.
•
Prevents rust and formation of sludge.
•
Keeps pneumatic tools operating longer
with greater power and less down time.
95842: 1pt. (473 ml)
95843: 1gal. (3.8 L)
51989 Repair Collar
•
Specially designed collar for use in vise to prevent damage
to valve body of tool during disassembly/assembly.
97782 Pin Wrench
•
Tool has a 3/8 in. square socket for use with 3/8 in. drive;
breaker bar, ratchet head, or torque wrenches.
96209 Motor Repair Clamp
•
Specially designed clamp to secure motor
cylinder before disassembly.
95749 Air Regulator
96037 Spindle Adapters
•
Specially designed to adapt a 3/4" male arbor to
accept wheels with a 1" unthreaded bore.
Reference Contact Information
1. American National Safety Institute – ANSI
25 West 43
rd
Street
Forth Floor
New York, NY 10036
Tel: 1 (212) 642-4900
Fax: 1 (212) 398-0023
2. Government Printing Office – GPO
Superintendent of Documents
Attn. New Orders
P.O. Box 371954
Pittsburgh, PA 15250-7954
Tel: 1 (202) 512-1803
Visit Our Web Site: www.dynabrade.com
DYNABRADE, INC., 8989 Sheridan Drive • Clarence, NY 14031-1490 • Phone: (716) 631-0100 • Fax: 716-631-2073 • International Fax: 716-631-2524
DYNABRADE EUROPE S.àr.l.,
© DYNABRADE, INC., 2002
Optional Accessories
3. European Committee for Standardization
Rue de Stassart 36
B - 1050 Brussels, Belgium
Zone Artisanale • L-5485 Wormeldange—Haut, Luxembourg • Telephone: 352 76 84 94 1 • Fax: 352 76 84 95 1
94473 Dynacushion
53159 Shroud Assembly
96532 Motor Tune-Up Kit
01904 Drop-In Motor
Composite-Style Coupler
53621 Over Hose Assembly
95281 – 19 mm open-end wrench.
95266 – 3 mm hex key wrench.
96132 – 6 mm hex key wrench.
30335 Air Supply Hose
Bearing Press Tool
96243: For installing 02057 Bearing.
96244: For installing 01266 Bearing.
53698 Carrier Wrench
94465 Wheel Inflation Tool
Email: [email protected]
®
Pneumatic Wheel
•
Easily regulate hardness by air pressure.
•
5" Diameter x 3-1/2" Wide.
•
Inflates to 20 PSIG maximum.
•
3-1/2" wide x 15-1/2" long belt size.
•
Specially designed shroud for use with
4" dia. x 4" wide or 100 mm x 90 mm
abrasive accessories.
•
Includes assorted parts to help maintain
and repair motor.
•
Allows quick and easy replacement.
No motor adjustments needed.
•
Lightweight 1.4 oz. (.05 Kg), non-marring
composite material.
•
Easy connect/disconnect by single
push-button action.
•
Shock-proof, low-vibration, crush-resistant.
94960: 1/4" Female NPT
94980: 1/4" Male NPT
•
Over Hose Assembly directs exhaust
away from operator.
•
3/8 in. I.D. x 60 in. Wide air supply
hose, includes: 3/8 in. NPT male and
female threaded fittings.
•
Used to install bearings.
•
Carrier Wrench has a 3/8" square socket
for use with 3/8" drive; breaker bar,
ratchet head, or torque wrenches.
•
Controlled inflation/deflation of
pneumatic wheel.
•
Has 1/4" female thread; fits 1/4" air hose.
•
95633 Nozzle replacement available.
DYNABRADE
PRINTED IN USA
®