Hi-Velocity HE PS Manual de instalación y funcionamiento - Página 3

Navegue en línea o descargue pdf Manual de instalación y funcionamiento para Limpiador de aire Hi-Velocity HE PS. Hi-Velocity HE PS 8 páginas.

Imprimir página

Specifications

HE PS

Capacity

1.5-3 Tons

Dimensions

" W x 25" H x 10" D

3/4

Flange

Weight

23 lbs

Filter Size

" W x 24

" H x 3

7/8

3/4

Power

Fuse

Service Panel

Catalyst

12,220 cells/4,583 Sq. In of Surface Area

Particle Filter

Electrostatic Needled MERV-13

Service

Filter - 6 Months *UV Lamps - 1 Year

*Caution: Risk of fire - replace only with 20180100001 U.V.

Lamps

IMPORTANT SAFETY

INSTRUCTIONS

Before installing the Hi-Velocity Air Purification System,

inspect for any signs of damage. During handling

and installation, take care to protect the catalytic

honeycomb side of the product from physical damage, as

the aluminum-titanium core is very soft and can be easily

damaged.

Warning - Always unplug the power cord from the HE

PS System when changing the filter or ultraviolet lamps.

Never look into a burning ultravioletlamp without proper

eye protection as sever damage to the eyes can result.

This product is rated for standard ambient air temperatures

during heating and air-conditioning functions and not

rated for elevated air temperatures in excess of 125

degrees fahrenheit.

Do not attempt to clean the catalytic honeycomb core

with cleaning solutions. The catalyst is radiated with short

wave ultraviolet light during periods of non-air flow and

is self-cleaning.

Do not install insulation within 76MM or 3 inches of

Luminaries.

Access for service is required when mounting above

ceilings or behind walls.

Do not install in a position where the interior module can

gravity fall from an elevated position and cause injury to

people or equipment below.

HE PS-1750

4-5 Tons

21" W x 25" H x 10" D

1/2" around unit

26 lbs

" D

W x 24

" H x 3

3/4

1/8"

3/4

120v/54 watts/1.1amps

AGC 2 amps

12 vac.

Make sure to install the Hi-Velocity Air Purification System

so that the inlet or return air enters the side containing the

MERV particle filter first (Fig. 1).

" D

FILTER SIDE

Unscrew the two locking knobs and remove the

inside components from the outer case.

Take care not to bend or distort the outer metal

enclosure.

Mount the outer case to the support plenum Note:

Do not use a screw length that will extend into or penetrate

the inside module containing the catalyst or filter.

Typical Horizontal and Vertical

Installation

Fig. 2 Horizontal Installation

HE PS

Air Flow

(2)

Installation

CATALYST SIDE

AIR FLOW

Fig. 1 HE PS Air Flow

(Fig. 2, Fig. 3)

Hi-Velocity Fan Coil

RPM-E