DYNABREEZE HE-51030 Instrucciones y manual del usuario - Página 10
Navegue en línea o descargue pdf Instrucciones y manual del usuario para Calentador eléctrico DYNABREEZE HE-51030. DYNABREEZE HE-51030 13 páginas.
Imprimir páginaTROUBLESHOOTING
ISSUE
The Heater does not operate,
even when it is plugged in &
the switch and thermostat
are both ON.
The heating element is
glowing.
The Heater doesn't heat up,
only the fan.
Abnormal noise.
10 3KW ELECTRIC HEATER
CAUSE
FIX
The plug is loose - bad
Disconnect the plug, check the connection of the
connection.
plug and socket. Try another socket.
The input voltage is too
Check power supply.
high or too low.
Do not block the Heater, keep away from articles like
The air inlet grille is
curtains, plastic bags, paper and other things which
blocked.
can cover the inlet.
The switch was not put
Turn the switch to heat setting.
on heat setting.
Thermostat in
Turn the thermostat knob and listen for a click. If
operation (ambient
there is no click and the thermostat is not damaged,
temperature achieved
the Heater will automatically switch on when the
or overheating).
Heater has cooled down.
Turn the Heater off and inspect the blockage of inlet
The self-resetting
or outlet. Disconnect the plug and wait at least 10
thermostat in operation
minutes for the protection system to reset before
(overheating).
attempting to restart the Heater.
Uneven ground or
Place Heater on a level surface and/or correct stand
stand not in upright
position.
position.