7inova 7W230 Manual de instalación rápida

Navegue en línea o descargue pdf Manual de instalación rápida para Punto de acceso inalámbrico 7inova 7W230. 7inova 7W230 2 páginas. Wireless ceiling mount access point 300m

Imprimir página

Quick Installation Guide

Wireless Ceiling Mount Access Point 300M

Model：7W230

2.5 The login screen below will appear. Enter the "Username" and "Password"

then click "Login" to login. The default Username is "admin" and Password

is "admin".

2.6 After logging in click "Easy Mode" and then click "Network Setting", you

will see 3 modes: AP Mode, Repeater Mode and Client Mode

Wireless-N Repeater

Before you start to use this device, please check if there's anything

missing in the package, and contact your dealer of purchase to

claim for missing items:

Package Contents:

1x 7W230 WiFi Repeater

1x 1m Ethernet cable with RJ45 connector

1x Quick Installation Guide

Appearance Introduction

LED indicators' Status Description:

WPS/Reset

Ethernet LED

WLAN LED

Power LED

Reset: If need to reset the Repeater, press and hold RESET button for 3-5

seconds, release until all other LED are off except Power LED.

Wireless-N Repeater

3 Configuration Mode

3.1 Configure AP Mode

3.1.1 Follow process 2.3 to 2.5.

3.1.2 Select "AP" and enter the information what you want to set up wireless

information and password, then click "Apply", wait for 3~5 seconds it complete.

3.2 Configure Repeater Mode

3.2.1 Follow process 2.3 to 2.5.

3.2.2 Select "Repeater" then click on "Search".

Wireless-N Repeater

Indicator

Name

Status

Description

Power Status Indicator

Green On

Get Powered

Green On

Ethernet Connected

Ethernet Status Indicator

LAN

Green fast blink

Data Transmission via Ethernet

Green slow blink

Wireless Function Launched

Wireless Status Indicator

Green fast blink

Data Transmission via wireless

Cautions:

1. Disconnect the device in thunderstorms in case of lightning damage.

2. Keep far from heat source and ensure ventilation.

3. Keep waterproof in the storage, transportation and operating environment.

1 Computer Configuration

1.1 Click "Start→Control Panel→Network and Internet→Network and Sharing

Center→Change adapter settings→Wi-Fi(right click)→Properties"

1.2 Double click "Internet Protocol Version 4(TCP/IPv4)"

1.3 To set up the computer IP 192.168.2.x (x arbitrary integer between 2~252),

subnet mask of 255.255.255.0, Click "OK". Back to the last interface and

click "OK"

Wireless-N Repeater

3.2.3 Select wireless which you want to connect and enter the password (if wireless don't

have password is "None"), then enter the wireless information what you want to set.

3.2.4 Then click "Apply" and wait for 3~5 seconds it is complete.

Wireless-N Repeater

2 Connect To Wireless Network

2.1 Pulg the Wi-Fi Repeater to a wall socket.

2.2 Click on the network icon(

) on the right

bottom of your desktop. You will find the signal

from the Wi-Fi Repeater. Click on "Connect"

and wait for a few seconds.

2.3 When shows: "Connect to a Network", please click "Connect to the

network without setting it up"

2.4 Open web browser and type http://192.168.2.1 in the browser's address

box. This number is the default IP address for this devices.

Note: Please check whether the WiFi-Repeater accord with factory default

settings once you can't download http://192.168.2.1. If you are still not sure

what reasons, you can reset the WiFi-Repeater, just need to press the reset

button for 3-5 seconds, then try again.

Wireless-N Repeater

3.3 Configure Client Mode

3.3.1 Follow process 2.3 to 2.5

3.3.2 Select "Client" then click on "Search"

Wireless-N Repeater