DynAccess Hydra Monoski Manual del usuario - Página 10

Navegue en línea o descargue pdf Manual del usuario para Robótica DynAccess Hydra Monoski. DynAccess Hydra Monoski 16 páginas.

Imprimir página

Adjusting the Footrest:

Buckling your belts:
Your monoski comes standard with four strap belts and one ratcheting belt. The buckles for the
strap belts are of the non-sewn type that are easy to adjust. Straps are secured with a tri-glide
on one side to prevent the straps from slipping out of the buckle.
Caution!
You can adjust the height of the monoski's footrest. To do this:
1.
Locate the two long ¼" bolts attaching the footrest to the
frame.
2.
Remove the bolts, nuts and spacers. Put them in a safe
place. Note that there are O-rings in the spacers.
3.
Move the footrest up or down as desired and center it
with the proper holes.
4.
Replace the two screws and four spacers to reconnect the
footrest to the frame. O-rings should be against the frames.
Take care to ensure that all screws are properly torqued.
10