Aircraft in Miniature Limited Transport Wings DC-10-30 Manual de instrucciones - Página 7
Navegue en línea o descargue pdf Manual de instrucciones para Juguete Aircraft in Miniature Limited Transport Wings DC-10-30. Aircraft in Miniature Limited Transport Wings DC-10-30 20 páginas.
Imprimir páginaAll manuals and user guides at all-guides.com
(4) Make the NLG and CLG bay parts.
(a) For the NLG cut out these parts from the .080"/2 mm plastic
sheet supplied:
-
Roof panel - 50 mm x 22 mm
-
Two side panels, each 50 mm x 20 mm
-
Front and rear bulkheads to the shape shown below.
22
Profile to suit fuselage curvature.
(b) For the CLG cut out these parts from the .080"/2 mm plastic
sheet supplied:
-
Roof panel - 50 mm x 22 mm
-
Two side panels, each 50 mm x 20 mm
-
Front and rear bulkheads to the shapes shown below.
18
(5) Cut off the centre engine intake. Also use the resin bypass duct
halves as templates cut away the rear fuselage until the resin
parts fit well as shown in the sketch below.
(6) Put half the thickness of the keel into one fuselage half and
cement it in place with liquid polystyrene cement.
(7)
File the edge of the fuselage keel to the internal radius of the
opposite fuselage half.
All dimensions in millimeters.
Skech not to scale.
All dimensions in millimeters.
Skech not to scale.
Profile to suit fuselage curvature.