GREAT PLANES F4U Corsair Manual de instrucciones - Página 10

Navegue en línea o descargue pdf Manual de instrucciones para Juguete GREAT PLANES F4U Corsair. GREAT PLANES F4U Corsair 16 páginas. Arf plane

❏

6. Insert the pushrod into the middle hole on the control

horn. Attach a snap keeper to the pushrod and secure it to

the pushrod with a drop of thin foam safe CA.

❏

7. Temporarily connect the elevator servo to your radio

system and center it.

❏

8. Center the elevator. Add a drop of Threadlocker to the

quick connect set screw and tighten it to secure

the pushrod.

❏

9. With the elevator at neutral and the quick connect

tight, glue the pushrod guide tube to the fuselage at the

point shown.

Motor Installation

❏

1. Locate the motor and gearbox assembly.

❏

2. Remove the cowl and slide the motor assembly into

the firewall as shown. The motor leads route into the radio

compartment from below.

❏

3. Using three 2 x 13mm

sheet metal screws, attach

the gearbox to the firewall.

There are holes predrilled in the

firewall as a guide. Remove the

screws and harden the holes

with thin CA. Allow the CA to

fully harden before reinstalling

the screws.