Dynacord LX 1600 Folleto y especificaciones - Página 3
Navegue en línea o descargue pdf Folleto y especificaciones para Amplificador Dynacord LX 1600. Dynacord LX 1600 4 páginas. Switchmode precision series ultra light weight power amplifiers
Imprimir páginaFRONT
The dB-calibrated level controls are implemented as ultra-precise detent potentiometers that are recessed in the front panel to pro-
tect them from accidental contact. Power, Protect, Signal and Limit LEDs provide a quick overview of the operating status.
REAR
The electronically balanced XLR IN / OUT sockets are
provided for direct operation with professional mixing
consoles and signal processors. All the models in the
LX series are designed for a Constant Gain of 32 dB.
The power outputs for Channels A and B are on
Speakon connectors. A Ground Lift switch is also provi-
ded to separate the chassis ground from the signal
ground in order to eliminate ground loop hum.
LX1600
With an output rated at 2 x 1300 watts into 2 ohms
and 2 x 800 watts into 4 ohms, this is the ideal
power amplifier for small to medium-sized full-range
cabinets and MF/HF components in active multi-
way systems.
LX2200
With a stable output of 2 x 1600 watts into 2 ohms and
2 x 1100 watts into 4 ohms, this is the ideal amplifier for
professional multi-way components as well as medium-
sized subwoofers in concert sound systems.
LX3000
The new flagship of the LX series delivers a
mighty 2 x 2100 watts into 2 ohms and 2 x 1500
watts into 4 ohms and therefore has plenty of
headroom for large subwoofer arrays.
SAFETY PACKAGE
The complete LX series is equipped with protections against
overheating, overloading, short-circuits, DC and HF as well as a
Back-EMF protection. With the Soft Start system, the power out-
SWITCHMODE PRECISION SERIES
ultra light weight power amplifiers
puts are switched on via a relay when a safe operational state
has been reached and a power-up delay prevents the mains
fuses being activated.