GREAT PLANES Slow Poke Sport .40 Manual de instrucciones - Página 4
Navegue en línea o descargue pdf Manual de instrucciones para Juguete GREAT PLANES Slow Poke Sport .40. GREAT PLANES Slow Poke Sport .40 20 páginas. Arf plane
Imprimir página
30-Minute Epoxy (GPMR6047)
R/C-56 Canopy Glue (JOZR5007)
Epoxy Brushes (GPMR8060)
Mixing Sticks (GPMR8055)
Threadlocker (GPMR6060)
Denatured Alcohol (for epoxy clean up)
Hobby Knife (HCAR0105), #11 Blades (HCAR0211)
Non-elastic monofilament or Kevlar fishing line (for stab
alignment)
Builders Triangle Set (HCAR0480) (for fin alignment)
Masking Tape (TOPR8018)
1/16" to 1/4" drill bit set
Dead Center
™
Engine Mount Hole Locator (GPMR8130)
Great Planes AccuThrow
control throws, GPMR2405)
IMPORTANT BUILDING NOTES
•
There are two types of screws used in this kit:
Sheet metal screws are designated by a number and a
length. For example #6 x 3/4"
This is a number six screw that is 3/4" long.
Machine screws are designated by a number, threads per
inch and a length. For example 4-40 x 3/4"
This is a number four screw that is 3/4" long with
forty threads per inch.
To order replacement parts for the Great Planes Slow Poke Sport .40 ARF, use the order numbers in the Replacement
Parts List that follows. Replacement parts are available only as listed. Not all parts are available separately (an aileron
cannot be purchased separately, but is only available with the wing kit). Replacement parts are not available from Product
Support, but can be purchased from hobby shops or mail order/Internet order firms. Hardware items (screws, nuts, bolts)
are also available from these outlets. If you need assistance locating a dealer to purchase parts, visit
www.greatplanes.com and click on "Where to Buy." If this kit is missing parts, contact Great Planes Product Support.
Order Number
GPMA2265......................................Wing Kit
GPMA2266......................................Fuse Kit
GPMA2267......................................Tail Set
GPMA2268......................................Landing Gear
™
Deflection Gauge (for measuring
ORDERING REPLACEMENT PARTS
Replacement Parts List
Description
Missing pieces ......................Contact Product Support
Instruction manual.................Contact Product Support
Full-size plans .......................Not available
Whenever the term glue is written you should rely upon
•
your experience to decide what type of glue to use. When a
specific type of adhesive works best for that step, the
instructions will make a recommendation.
•
Whenever just epoxy is specified you may use either
30-minute epoxy or 6-minute epoxy. When 30-minute epoxy
is specified it is highly recommended that you use only 30-
minute (or 45-minute) epoxy, because you will need the
working time and/or the additional strength.
•
Photos and sketches are placed before the step they
refer to. Frequently you can study photos in following steps
to get another view of the same parts.
•
The Slow Poke Sport .40 ARF is factory-covered with
Top Flite MonoKote
®
film. Should repairs ever be required,
MonoKote can be patched with additional MonoKote
purchased separately. MonoKote is packaged in six-foot rolls,
but some hobby shops also sell it by the foot. If only a small
piece of MonoKote is needed for a minor patch, perhaps a
fellow modeler would give you some. MonoKote is applied
with a model airplane covering iron, but in an emergency a
regular iron could be used. A roll of MonoKote includes full
instructions for application. Following are the colors used on
this model and order numbers for six foot rolls.
White TOPQ0204
Gray TOPQ0211
Sapphire Blue TOPQ0226
Black TOPQ0208
How to Purchase
Contact Your Hobby
................
Supplier to Purchase
These Items
4