Dynacord SL 900 Ficha de datos - Página 3
Navegue en línea o descargue pdf Ficha de datos para Amplificador Dynacord SL 900. Dynacord SL 900 4 páginas. Sl series standard precision power amplifiers
Imprimir página
Technical Specifications
Load Impedance
Maximum Midband Output Power
THD = 1%, 1 kHz, Dual Channel
Rated Output Power
THD < 0.1%, 20 Hz to 20 kHz
Maximum Single Channel Output Power
Dynamic-Headroom, IHF-A
Maximum Single Channel Output Power
Continuous, 1 kHz
Maximum Bridged Output Power
THD = 1%, 1 kHz
Maximum RMS Voltage Swing
THD = 1%, 1 kHz
Power Bandwidth
THD = 1%, ref. 1 kHz, half power @ 4
Voltage Gain, ref. 1 kHz
Input Sensitivity
rated power @ 8 , 1 kHz
THD at rated Output Power
MBW = 80 kHz, 1 kHz
IMD-SMPTE, 60 Hz, 7 kHz
DIM30, 3.15 kHz, 15 kHz
Maximum Input Level
Crosstalk
ref. 1 kHz, at rated output power
Frequency Response, ref. 1 kHz
Input Impedance, active balanced
Damping Factor, 1 kHz
Slew Rate
Signal to Noise Ratio
A-weighted
Output Noise, A-weighted
Output Stage Topology
Power Requirements
Power Consumption
1/8 maximum output power @ 4
Mains Fuse
Protection
Cooling
Ambient Temperature Limits
Safety Class
Dimensions (W x H x D), mm
Weight
Signal Processing
Optional Accessories
Depending on the ambient temperature, the unit might not operate continously at 2 W load in Dual Mode or 4 W in Bridged Mode.
In addition input power exceeds 1.1 times rated power consumption with 2 W load in Dual Mode or 4 W load in Bridged Mode
Bosch Security System, Inc. • 12000 Portland Ave South • Burnsville, MN 55337, USA • Phone 1 800 392 3497 • Fax 1 800 955 6831
Subject to change without prior notice. Printed in Germany
SL 900
2
4
8
2
650 W 450 W 270 W 900 W 600 W 380 W 1250 W 900 W 550 W 1800 W 1200 W 750 W
-
400 W 200 W
-
1150 W 660 W 350 W 1700 W 950 W 480 W 2450 W 1400 W 700 W 3400 W 1800 W 950 W
850 W 540 W 310 W 1200 W 750 W 420 W 1700 W 1100 W 630 W 2400 W 1500 W 850 W
-
1300 W 900 W
-
55.3 V
+2.2 dBu (1.0 V
)
+3.1 dBu (1.11 V
rms
25 V/s
> 106 dB
Class AB
240 V, 230 V, 120 V or 100 V; 50 Hz to 60 Hz (factory configured)
550 W
240 V / 230 V: T10AH;
240 V / 230 V: T12AH;
120 V / 100 V: T20AH
120 V / 100 V: T25AH
Audio limiters, High temperature, DC, HF, Back-EMF, Peak current limiters, Inrush current limiters, Turn-
12.6 kg (27.8 lbs)
14.8 kg (32.6 lbs)
SL 1200
SL 1800
4
8
2
4
500 W 250 W
-
800 W 400 W
1800 W 1200 W
-
2800 W 1800 W
65.1 V
78.8 V
< 10 Hz to 30 kHz
32.0 dB
)
+5.1 dBu (1.39 V
rms
< 0.03%
< 0.1%
< 0.05%
+21 dBu (8.69 V
)
rms
< -80 dB
10 Hz to 40 kHz (±1 dB)
20 k
> 300
26 V/s
27 V/s
> 107 dB
> 109 dB
< -71 dBu
700 W
700 W
240 V / 230 V: T15AH;
120 V / 100 V: T25AH
on delay
Front-to-rear, 3-stage-fans
+5 °C to +40 °C (40 °F to 105 °F)
I
483 x 88.1 x 421.5
16.3 kg (35.9 lbs)
LPN, switchable
Rear-rackmount D113223 (RMK-15)
Vs 02
28-Jan-11
SL 2400
8
2
4
8
-
1100 W 550 W
-
3600 W 2400 W
90.6 V
)
+6.6 dBu (1.66 V
)
rms
rms
30 V/s
> 110 dB
Class H
850 W
240 V / 230 V: T15AH;
120 V / 100 V: T30AH
17.7 kg (39.0 lbs)
F01U076853