GREAT PLANES Super Sportster 40 Manual de instrucciones - Página 4

Navegue en línea o descargue pdf Manual de instrucciones para Juguete GREAT PLANES Super Sportster 40. GREAT PLANES Super Sportster 40 20 páginas.

General Inspection

Eliminate any wrinkles you find in the covering by shrinking

them away with a low temperature setting on a heat gun,

then apply pressure to the area with a covering iron and a

hot sock. This will securely bond the covering to the wood

so the wrinkles will be less likely to reappear in the future.

1/64" = .4mm

1/32" = .8mm

1/16" = 1.6mm

3/32" = 2.4mm

1/8" = 3.2mm

5/32" = 4mm

Inch Scale

Metric Scale

3/16" = 4.8mm

1/4" = 6.4mm

3/8" = 9.5mm

1/2" = 12.7mm

5/8" = 15.9mm

3/4" = 19mm

Several times during construction we refer to the "top" or

"bottom" of the model or a part of the model. It is understood

that the "top" or "bottom" of the model is as it would be when

the airplane is right side up and will be referred to as the

"top" even if the model is being worked on upside-down.

1" = 25.4mm

2" = 50.8mm

3" = 76.2mm

6" = 152.4mm

12" = 304.8mm

15" = 381mm

100 110 120 130 140 150 160 170 180

18" = 457.2mm

21" = 533.4mm

24" = 609.6mm

30" = 762mm

36" = 914.4mm