HiB Globe 50 Manual
Navegue en línea o descargue pdf Manual para Productos de cuidado personal HiB Globe 50. HiB Globe 50 2 páginas.
También para HiB Globe 50: Manual de inicio rápido (2 páginas), Manual (2 páginas), Manual de inicio rápido (2 páginas)
![HiB Globe 50 Manual](/uploads/products/server2/1887845/1887845.jpg)
This product is IP44 rated and is suitable for installation in
&
zones:
2
Outside Zone
All installations must comply with guidelines which are based on a zonal
concept. The diagram above illustrates this concept and must be followed
to ensure the safe installation of electrical appliances in the bathroom. These
regulations apply to domestic installations only.
electrical bathroom products must be installed in accordance with
current building and wiring regulations. If in doubt please contact
an electrician.
Installation
1. Position the mirror in a suitable location (according to the zonal
diagram - Fig. 1), ensuring that the domestic electrical mains
supply is within reach of the electrical entry point of the product.
2. Carefully mark the position of the mirror using a soft pencil
ensuring it is level. Remove the mirror and mark the mounting
points. Please ensure that all marked mounting points
accurately match up with the fixing points on the mirror.
3. Using a suitable drill bit, drill holes in the marked positions to a
suitable depth. If drilling through tile, use a ceramic drill bit.
4. Insert wall plugs level with the surface of the wall. If fitting to a tiled
surface, wall plugs should be inserted below the tile surface to
avoid cracking. NB. For plasterboard walls, specialist fixings should
be purchased, available from any DIY or hardware store.
5. Screw supplied fixings into wall plugs.
6. Ensure the domestic electrical mains supply to which the
mirror is being connected is turned off. Connect the domestic
mains supply to the terminal box according to the wiring diagram
(Fig. B) overleaf.
7. Hang the mirror in position.
8. Switch the domestic electrical mains supply for the mirror back on.
NB. LED Mirrors with charging socket only; On first use of the charging
socket, there may be resistance when inserting the plug. Make sure
that the mirror is held firmly so that it is not pushed off the wall. After a
few uses, resistance will ease and the socket will function as normal.
WEEE compliance
Must not be mixed with general household waste
T:
+44 (0)20 8441 0352
F:
+44 (0)20 8441 0219
Building 3, North London Business Park, Oakleigh Road South, New Southgate, London. N11 1GN
©HiB Copyright: No part of this document may be reprinted or duplicated without HiB consent. All sizes and measurements are approximate, but we do try and make sure they are as accurate as possible. In the
interest of continuous product development, HiB reserves the right to alter specifications as necessary. E & OE.
(Fig. 1)
HiB recommends that all
E:
Illuminated Mirrors
Name
Art No.
Name
Alpine 50
78753000
Globe 50
Alpine 60
78754000
Globe 60
Alpine 80
78755000
Globe 90
Alpine 100
78756000
Globe 120
Arena 80
79530800
Globe 140
Arena 120
79531200
Vega 40
Duplus 50
78727000
Vega 50
Duplus 60
78728000
Vega 60
Duplus 80
78729000
Vega 80
Globe 45
78400000
Vega 120
Thank you for purchasing this HiB product.
Please read through these instructions carefully and refer back to
them during installation to ensure that your product is fitted safely and
that it retains its high quality finish.
Please retain this leaflet for future reference.
Before installation, ensure the domestic electrical mains supply
to which the mirror is to be connected is turned off. Before
drilling, ensure that there are no hidden cables or pipes in the
wall.
Mounting Points Diagram (Fig. A)
REAR VIEW
mounting points
Note: Globe / Arena are dual orientation. Alpine,Duplus and Vega are
fixed orientation.
Operation Instructions
Alpine/ Arena / Vega - To turn illumination on or off, press the touch
sensor. To cycle through warm to cool colour temperature, press and
hold the touch sensor - release when the desired colour temperature
has been reached. Heated Pad is only on when mirror is illuminated.
Globe / Duplus - To turn illumination on or off, wave hand past
the sensor on the side/bottom of the mirror. To alter the colour
temperature, hold your hand over the sensor, remove hand when the
desired colour temperature has been reached. Heated Pad is only on
when mirror is illuminated.
NB. Globe / Duplus mirrors must be installed with a minimum distance
of 150mm between the infra-red sensor switch and any adjacent wall or
object to ensure correct operation of the sensor.
hib.co.uk
FI#01 017 R191121
Art No.
78500000
78600000
78640000
78700000
78710000
78749000
78750000
78751000
78752000
78748000
Hanging landscape
Ver No.
3.0 Jan 2020