DayStar Filters SolaREDi Odyssey Manual de instrucciones - Página 2

Navegue en línea o descargue pdf Manual de instrucciones para Telescopio DayStar Filters SolaREDi Odyssey. DayStar Filters SolaREDi Odyssey 6 páginas. Hydrogen alpha solar telescope

Imprimir página

Daystar filterS

SolaREDi

Odyssey

Dedicated telescope for Hydrogen Alpha solar observing.

Wavelength: Hydrogen Alpha 6562.8 Å

Focal length 1375mm, F/23

Clear aperture: 60mm

Clear exit aperture: 32mm

2 element refractor.

Thank you for purchasing the DayStar Filters SolaREDi Odyssey telescope. This

telescope has an 60mm F/5.7 doublet and a TeleVue 4X powermate to accom-

plish a focal length of 1375mm. The diffraction limited resolution of this tele-

scope at Hydrogen Alpha is approximately 2.8 arc seconds.

WARNING: POINTING TELESCOPES AT THE SUN CAN BE VERY DANGEROUS WITHOUT

THE PROPER EQUIPMENT AND CONFIGURATION. NEVER POINT AN ORDINARY TELE-

SCOPE AT THE SUN WITHOUT A SPECIAL, COMMERCIALLY MANUFACTURED SOLAR FIL-

TER AFFIXED TO THE TELESCOPE. WHEN USING A DEDICATED SOLAR TELESCOPE SUCH

AS THE SOLAREDi, REGULARLY CHECK THE TELESCOPE CONDITION TO BE SURE THAT NO

PARTS HAVE BEEN ADJUSTED OR TAMPERED WITH IN A WAY THAT THE TELESCOPE

COULD COME APART.

WHEN FINDING THE SUN USING THE "Sol-Searcher", DO NOT

LOOK THROUGH THE HOLE. MERELY OBSERVE THE POSITION OF THE DOT PROJECTED

THROUGH THE HOLE ONTO THE VIEWING SCREEN.

TELESCOPE MAY NOT BE FUNCTIONING OR ASSEMBLED PROPERLY, DO NOT ATTEMPT

USE. ANY UNFILTERED LIGHT PASSING THROUGH A TELESCOPE CAN CAUSE INSTANT

AND PERMANENT EYE DAMAGE.

KEEP THIS OPERATING GUIDE WITH THE SolaREDi AT ALL TIMES.

Telescope Operating Guide

IF YOU SUSPECT THE SOLAREDi

Other DayStar Products:

ION Filter:

- New in 2011, DayStar has upgraded the once

temperature sensitive T-scanner line with the intro-

duction of the new ION filter. This entry level rear

mounted filter offers the same ease of use as

SolaREDi with the unlimited aperture of the

Quantum.

ION works in all climates summer or

winter.

Quantum H-alpha Filter:

- Introduced in 1973, with housing improved in

2007, the Quantum is a heat-controlled precision

tuned filter which is applied at the rear of any tel-

escope of any aperture operating at F/30.

Requires a front mounted Energy Rejection Filter

(available in sizes up to 165mm). Quantum filters'

tuning is controlled to 0.1Å accuracy and may

be tuned up to 1.0Å in red and blue wing.

Operates on 12VDC. Includes LCD readout and

wing-shift button controls, serial interface port for remote operation,

international power supply and 6 foot extension cord.

Energy Rejection Filter:

Mounted on the front of the telescope before the

objective, a red or yellow colored glass Energy

Rejection Filter (ERF) is designed to absorb excess

UV light before entering the telescope system.

Note that colored ERF glass cannot be used in

conjunction with Calcium line filters. ERF glass is

available in sizes from 50mm up to 165mm.

Calcium II K and H Line Filters:

Calcium II line filters are aimed at one of two important emission lines of

Calcium at either 3933Å or 3969Å. The Ca II H-Line filter is designed for

visual use. At 5.0Å wide, and higher into the visual spectrum, it offers a

brighter and easier image to see. It is offered in

a Tilt-tune housing like the T-scanner, as tuning

isn't as critical due to the wide emission line. The

Ca II K-Line 2.0Å filters are for professional appli-

cations intended for observations of the sun's

atmosphere. It is offered in the Quantum style

housing in order to precisely target subordinate

lines inside the main K line.

For information about other DayStar products, contact your local dealer

or visit: www.DayStarFilters.com