Automated Logic InterOP8500 Instrucciones técnicas - Página 2

Navegue en línea o descargue pdf Instrucciones técnicas para Unidad de control Automated Logic InterOP8500. Automated Logic InterOP8500 20 páginas.

Imprimir página

Introduction

The InterOP8500 mounts directly to a Johnson

Controls panel, replacing the Johnson FIC-1n1

control board and the PCR-102. The

InterOP8500 uses the same mounting

brackets and can be powered by the existing

power supply (using a special adaptor cable).

However, in order to retain the UL listing, the

RPA-105 and the LPS-105 must be replaced by

the PWRSUP8500.

In addition, the InterOP8500 uses the Johnson

field termination board (FTB-102) for binary

I/O and analog input. Please note that slave

FICs must be replaced by separate, stand-

alone InterOP8500 modules.

The InterOP8500's edge connector plugs

directly into the field termination board's

socket. Once connected, the InterOp8500

accesses the binary and analog I/O, as well

Keypad Port

CMnet

Terminal

Access

Port

Comm Mode

Jumper

Expander Port

Binary Output

HOA Switches

Binary I/O

Power Jumper

2/8"

.64 cm

Revised 7/10/01 • InterOP8500

Keypad

Dual Rotary

Power

Address

11 1/4"

28.58 cm

10's

1's

Binary Outputs

4 7/8"

12.38 cm

Binary I/O

Figure 1. InterOP8500 layout and dimensions

as an isolated 12VDC power supply for its

binary outputs. The InterOP8500 board

contains the microprocessor, a connection

port for the network connection, and a port

for I/O expansion. The InterOP8500 has 8

binary inputs, 15 analog inputs (which can be

set to either RTD or voltage mode), and 16

digital outputs.

The Access Port allows communication with

WebCTRL or SuperVision. The InterOP8500's

keypad port provides the interface for serial

communications with a BACview

BACview

keypad display. Refer to the

BACview

or BACview

Instructions for more information on small

and large keypad display.

NOTE A 24VAC power supply is required for

NOTE

a keypad.

Baud Rate

Format

Power

Switch

Button

Switch

InterOp8500

Analog Inputs

1.59 cm

Hardware Technical

Power

Terminals

8 5/8"

21.9 cm

3/8"

.95 cm

5/8"

2.5 cm