HiB Air-Star White Manual rápido - Página 3

Navegue en línea o descargue pdf Manual rápido para Ventilador HiB Air-Star White. HiB Air-Star White 4 páginas.

Connect the electrical wiring to the motor

according to the diagram below.

- Switching fan and luminaire on/off

together with one switch:

Fix the fan to the ceiling using 4 screws.

Replace the cover and protective grille.

Technical Information

Power input: 230v (must be connected to 12v

transformer supplied)

Maximum ventilation volume: 89m

Power consumption: 14W + 1W LED Lamp

Dimensions: W150 x H150 x D125mm

Warning

The Air-Star is supplied with an MR16 1 watt

LED bulb. This is the only bulb suitable for use

with this fan. Do not replace with any other

bulb as this will invalidate any warranty. Do not

exceed the stated wattage.

Maintenance

In the event of a fault, please check the in-line

fuse located inside the connection box.

Fan maintenance is to be performed only after

the fan is disconnected from the mains power

supply. Maintenance means periodic clearing

of the surfaces from dust and dirt.

In order to remove the fascia for maintenance,

please remove the small retaining screw and

gently prise the fascia away from the casing.

Care Instructions

All surfaces should be cleaned with diluted

detergent, i.e. washing up liquid, and a soft

cloth. Scourers and scouring agents should not

be used, as these may cause damage to the

surface of the product.

/hr (±5%)

hib.co.uk