EmerCom Technologies EMC-ALRM Manual del usuario - Página 2
Navegue en línea o descargue pdf Manual del usuario para Sistema de seguridad EmerCom Technologies EMC-ALRM. EmerCom Technologies EMC-ALRM 10 páginas. Phone line monitoring system
También para EmerCom Technologies EMC-ALRM: Manual del usuario (8 páginas)
Imprimir página
Quick start guide
1
Connect first station phone line alarm
STN#1 to PLM on EMC-60 phone
Connect additional stations (as required)
STN#X to PLM on EMC-60 phon
2
Configure STN#1 group
Move jumper to GROUP A or GROUP B
Configure additional station's group
Move jumper to GROUP A or GROUP B or
DISABLED
3
Connect alarm board
GROUP A to PLM IN
PWR –OUT+ to +12-12VDC-
Connect 2nd alarm board (if required)
GROUP B to PLM IN
PWR –OUT+ to +12-12VDC-
4
Connect power
16.5VAC to PWR IN
12V (from battery) to +BAT
5
Troubleshoot alarms (if any)
POWER ON for normal operation
Change battery if REPLACE BATTERY alarm
No input power detected if NO MAINS alarm
Refer to troubleshooting in manual if FAULT
alarm
Customer Care: Call 1-844-EMERCOM (1-844-363-7266) for assistance.
EMC-PAC User Guide
- 2 -