7th Sense Delta Pico Manual del usuario del hardware

Navegue en línea o descargue pdf Manual del usuario del hardware para Servidor 7th Sense Delta Pico. 7th Sense Delta Pico 2 páginas.
También para 7th Sense Delta Pico: Manual del usuario del hardware (2 páginas)

7th Sense Delta Pico Manual del usuario del hardware
Specification
Environmental Characteristics
Temperature
Humidity (non-condensing)
Altitude
Product
Electrical Rating
19 VDC ⎓ 4.7 A (Max)
Pico Server
Pico Power
100-240 VAC ~ 3-1.5 A, 60-
Supply Unit
50 Hz
End of Service Life
Dispose of the equipment and any components in accordance with all local and national
safety and environmental requirements.
Regulatory Compliance Statements
FCC
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions: (1) this device may not cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause undesired operation.
Note: This equipment has been tested and found to comply with the limits for a Class A digital
device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference when the equipment is operated in a commercial
environment. This equipment generates, uses, and can radiate radio frequency energy and, if not
installed and used in accordance with this user guide, may cause harmful interference to radio
communications. Operation of this equipment in a residential area is likely to cause harmful
interference in which case the user will be required to correct the interference at his own expense.
European Union
This is a Class A product. In a domestic environment, this product may cause radio interference, in
which case the user may be required to take adequate measures.
7thSense Design Ltd : 2 The Courtyard, Shoreham Road, Upper Beeding, BN44 3TN, UK
www.7thsense.one
Copyright © 7thSense Design Ltd : M456-3
Operating
Non-operating
+15 to +30
°
C
-10 to +50 °C
10 to 90%
5 to 95%
<2000 m
<10000 m
Weight (kg)
Dimensions (H × W × D)
1.4
44 mm × 145 mm × 152 mm
13 mm × 126 mm × 49 mm
Delta Pico Media Server
Hardware User Guide
Customer Support Portal: https://portal.7thsense.one
Support
If your Delta Pico Media Server was purchased through one of our regional distributors, please
contact your supplier directly for support.
Visit our customer support portal where you can find a wide range of support documentation,
together with contact information.
Warranty
Standard warranty is 24 months, return-to-supplier. Please contact your supplier if you require an
extended warranty.
Please ask for instructions and request authorisation before returning a server to your supplier.
Operating Instructions
Operating instructions for your server can be found in the Online User Guides section of the
customer support portal.
Handling and Installation
Unpacking
Unpack your Pico server carefully onto a clean surface and examine it for any signs of transit
damage. Contact your supplier immediately if anything appears to be damaged, or any parts
missing. Please retain all packaging in case of future need to return a server.
Rack mounting
A rack mounting frame and blanking plates can be supplied for mounting up to 3 Pico servers as a
1U height rack unit.
Full details for safely mounting Pico servers are given on document M511 available from 7thSense
Design and can be found in the Online User Guides section of the customer support portal.
Dual NIC ports
July 2020
On the rear right-hand side, the RJ45 port labelled 'NIC 1' is factory-set to
a static IP and 'NIC 2' to DHCP. A label with this initial static IP address is
provided on each unit.