AFG 3.0 AE Manual del usuario - Página 18

Navegue en línea o descargue pdf Manual del usuario para Entrenador elíptico AFG 3.0 AE. AFG 3.0 AE 20 páginas.
También para AFG 3.0 AE: Manual del usuario (20 páginas)

Imprimir página

C O MM ON PR ODU CT QU E S T IONS

ARE THE SOUNDS MY ELLIPTICAL MAKES NORMAL?

Our ellipticals are some of the quietest available because they use belt drives and friction free magnetic

resistance. We use the highest grade bearings and belts to minimize noise. However, because the resistance

system itself is so quiet, you will occasionally hear other slight mechanical noises. Unlike older, louder

technologies, there are no fans, friction belts, or alternator noises to mask these sounds on our ellipticals.

These mechanical noises, which may or may not be intermittent, are normal and are caused by the transfer

of significant amounts of energy to a rapidly spinning flywheel. All bearings, belts and other rotating parts

will generate some noise which will transmit through the casing and frame. It is also normal for these

sounds to change slightly during a workout and over time because of thermal expansion of the parts.

WHY IS THE ELLIPTICAL I HAD DELIVERED LOUDER THAN THE ONE AT THE STORE?

All fitness products seem quieter in a large store showroom because there is generally more background

noise than in your home. Also, there will be less reverberation on a carpeted concrete floor than on a wood

overlay floor. Sometimes a heavy rubber mat will help reduce reverberation through the floor. If a fitness

product is placed close to a wall, there will be more reflected noise.

HOW LONG WILL THE DRIVE BELT LAST?

The computer modeling we have done indicated virtually thousands of maintenance free hours. Belts are

now commonly used in far more demanding applications such as motorcycle drives.

CAN I MOVE THE TRAINER EASILY ONCE IT IS ASSEMBLED?

Your elliptical has a pair of transport wheels built into the front legs. It is easy to move your elliptical by

rolling it on the front transport wheels. It is important that you place your elliptical in a comfortable and

inviting room. Your elliptical is designed to use minimal floor space. Many people will place their ellipticals

facing the TV or a picture window. If at all possible, avoid putting your elliptical in a unfinished basement.

To make exercise a desirable daily activity for you, the elliptical should be in a comfortable setting.

CAN I PEDAL BACKWARDS ON MY ELLIPTICAL?

Your elliptical allows you to pedal both forward and backwards to exercise and strengthen a wider range

of muscles.

3.0_4.0 AE_Rev.1.6.indd 34-35

MAIN TENANC E

WHAT KIND OF ROUTINE MAINTENANCE IS REQUIRED?

We use sealed bearings throughout our ellipticals so lubrication is not needed. The most important

maintenance steps are to wipe perspiration off the unit after each use and periodically checking the

assembly bolts for tightness.

HOW DO I CLEAN MY ELLIPTICAL?

Clean with soap and water cleaners only. Never use solvents on plastic parts.

Cleanliness of your elliptical and its operating environment will keep maintenance problems

and service calls to a minimum. For this reason, AFG recommends that the following preventive

maintenance schedule be followed.

AFTER EACH USE (DAILY)

Turn off the elliptical by unplugging the power cord from the wall outlet

• Wipe down the elliptical with a damp cloth. Never use solvents, as they can cause damage to the

elliptical.

• Inspect the power cord. If the power cord is damaged, contact AFG.

• Make sure the power cord is not underneath the elliptical or in any other area where it can become

pinched or cut.

To remove power from the elliptical, the power cord must be disconnected from

WARNING

the wall outlet.

WEEKLY

Clean underneath the elliptical, following these steps:

• Turn off the elliptical

• Move the elliptical to a remote location.

• Wipe or vacuum any dust particles or other objects that may have accumulated underneath the

elliptical.

• Return the elliptical to its previous position.

EVERY MONTH

• Inspect all assembly bolts and pedals on the machine for proper tightness.

• Clean any debris off of the pedal arm wheels and guide rails.

8/27/07 3:36:53 PM