DAYTAI DT-OLS-116 Manual del usuario - Página 11

Navegue en línea o descargue pdf Manual del usuario para Equipos de iluminación DAYTAI DT-OLS-116. DAYTAI DT-OLS-116 16 páginas. Optical light source

Imprimir página
When the tester is standby, press
choosed, the "Auto-off" will display on the left bottom of the screen.

5.3 Backlight Setting

After open the optical power meter, long press
5.3.1
"LDR" Intelligent backlight control mode
Long press
,"B/L SET" is green (6-6),after 10 seconds, the green indicate off, the LDR the controller will
automatically adjust the backlight within 15 seconds with the outside light, which to save the power.
5.3.2 Choose the key control backlight mode
Long press
, "B/L SET" indicator turns to red(6-7), enter into key control backlight mode, after 10 seconds
the indicator off, short press

5.4 Output Power

Notice: Preheating is normally required to ensure a stable output power for the
Optical Light Source (DT-OLS-116)
5-5
key can cancel or choos auto-off function.If auto-off fucniton are
5-6
can ON/OFF the backlight.
5-7
, choose backlight control mode.
Indicator (Green)
Indicator (red)