Ignition Interlock Devices BrAC Audit Lock-1 Instrucciones y manual del usuario - Página 5
Navegue en línea o descargue pdf Instrucciones y manual del usuario para Equipos de prueba Ignition Interlock Devices BrAC Audit Lock-1. Ignition Interlock Devices BrAC Audit Lock-1 7 páginas.
Imprimir páginaIf the rolling retest is failed or the driver refuses to take the test in the 3 minute time period, an indication will be displayed
on the screen, the alarm lamp will blink and it will be recorded in the user's log. The screen will also display a message
indicating to the user the device will go into a block state in 5 days.
Device lock-out:
The device will be sent into a lock-out state for any of the following:
Service or Calibration Appointment is overdue
A Rolling Retest is failed and the device is not reset by the service center within 5 days
Periodically, calibration is needed to guarantee the testing accuracy. When it's time to calibrate, the device will display
instructions and the device will be locked-out if not calibrated within the 5 day time span set by the administrator. With the
device being locked, the user will need to contact their service center.
Figure 7: Rolling retest failed
Figure 8: Calibration