DAYTEK HomeGardener Instrucciones de montaje

Navegue en línea o descargue pdf Instrucciones de montaje para Carrito de exterior DAYTEK HomeGardener. DAYTEK HomeGardener 2 páginas.

WHEEL

1. PLACE WHEELBARROW BOWL UPSIDE DOWN OVER A BENCH OR TABLE EDGE.

2. ASSEMBLE HANDLES "A" INTO FRONT FRAME "B" AS PER DIAGRAM. LOCATE ASSEMBLY OVER THE HOLES IN THE

BOWL. INSERT 2 x LONG BOLTS FROM INSIDE THE BOWL AT POSITION 1 AND FINGER TIGHTEN WITH WASHERS & NUTS.

3. ASSEMBLE LEGS "C" TOGETHER IN A CROSS-PATTERN AT POSITION 2 WITH 1 x SHORT BOLT AND FINGER TIGHTEN

WITH WASHER & NUT.

4. LOCATE THE LEGS OVER THE BOWL AS SHOWN AND FIX WITH 4 x LONG BOLTS AT POSITION 3 & 4. FINGER TIGHTEN

WITH WASHERS & NUTS.

CAUTION!

RECOMMENDED PRESSURE. ENSURE SQUARE NECK OF BOLTS ARE

LOCATED IN BOWL DURING ASSEMBLY.

TIP

THEM IN POSITION DURING ASSEMBLY. USE A MALLET TO KNOCK

COMPONENTS INTO POSITION IF NEEDED.

BOWL

- INFLATE TYRE WITH CARE. DO NOT EXCEED

– PLACE STRONG TAPE OVER THE HEAD OF THE BOLTS TO HOLD

AXLE x1

v1.0

AXLE SPACER

AXLE

BRACKET