Celect DRF3 Manual de instrucciones - Página 4

Navegue en línea o descargue pdf Manual de instrucciones para Termostato Celect DRF3. Celect DRF3 6 páginas. Rf thermostat

etc. The metal objects or electronic devices maybe

interfere with the RF communication, so maximum

distance will be shorter.

4. Do not mount onto metal wall boxes.

A. Installation, Mounting:

Caution:

Turn off DRF3 and the electrical devices (e.g. heater,

cooler) which will be connected before installation.

It is highly recommended that the installation procedure

is processed by trained personnel.

The thermostat (Receiver and Transmitter) should be

mounted on an inner wall 1.5m above the floor in

position where it is readily affected by changes of the

general room temperature with freely circulating air.

Prevent direct exposure to sunlight; dripping or

splashing area.

Do not place this unit at a location where air circulation is

2. Return the room temperature display after 10seconds

with the <

> icon disappears.

E. Jumper Selection:

Delay / No Delay jumper:

Heater

No delay

10sec

Delay

4mins

Choose the Delay option if compressor heat is connected.

Heater/Cooler jumper:

Select the heater option when a heater is connected to

the receiver. Select the cooler option when a cooler is

connected to the receiver.

F. Address setting:

In transmitter and receiver, there are dip switches to

select the addresses. The receiver ignores the message

which is sent by the transmitter with different address

Cooler

4mins