Daytona DTJ10T Manual del usuario e instrucciones de seguridad - Página 4
Navegue en línea o descargue pdf Manual del usuario e instrucciones de seguridad para Jacks Daytona DTJ10T. Daytona DTJ10T 8 páginas. Heavy duty hydraulic toe jack
Imprimir página
Specifications
Weight Capacity
Low Profile Toe Lift
Top Platform (Head) Lift
Base Dimensions
Operation
Components
Raising Jack
WARNING! TO PREVENT SERIOUS INJURY: Only use
jack on hard, level surfaces, such as solid concrete slabs.
1. Attach end of Handle to Release Stem.
2. Turn Release Stem clockwise to completely
close valve. Do not overtighten valve.
3. Remove handle from Release Stem.
Insert Handle into Handle Socket.
Lowering Jack
1. Attach end of Handle to Release Stem.
2. Turn Handle slowly counterclockwise to open valve.
Page 4
Head
Reservoir
Handle Socket
Handle
For technical questions, please call 1-888-866-5797.
10 Tons (20,000 lb.) (Toe Lift)
12.5 Tons (25,000 lb.) (Head Lift)
1-1/4" - 6-7/8"
12-7/8" - 18-1/2"
11-1/2" x 8-5/8"
Release Stem
4. Make sure load is centered, and that
Jack is lifting an appropriate area.
WARNING! TO PREVENT SERIOUS INJURY:
Toe must be positioned against a secure lifting
point. Load must be centered on Toe.
5. Pump Handle to raise load.
Note: Do not turn Release Valve more
than two complete revolutions.
Fill Plug
Toe
Item 57664