HiBoost F20G-5S-LCD Manual del usuario - Página 8

Navegue en línea o descargue pdf Manual del usuario para Extensor HiBoost F20G-5S-LCD. HiBoost F20G-5S-LCD 20 páginas.

unusable signal quality can cause oscillation, this is why it is important to fully

understand the LCD indications on your booster, as they will help you identify and

solve any potential issues.

The LCD indicates the status of the booster system.

4 UNDERSTAND THE PORTS, LCD and LED STATUS,MGC

1) Outdoor port: connected with the donor antenna by cable.

2) Indoor port: connected with server antenna directly or by cable.

3) DC IN: connected with power supply.

After the booster is powered on, uplink (UL) and downlink(DL) gain and DL output

power are displayed. "Band"– Shows the working frequency. Below is a list of the

frequencies displayed corresponding to the Band display shown on the screen.

Frequency

700MHz Lower A/B/C blocks

700MHz Upper C block

CDMA800&GSM850&UMTS850

PCS1900

AWS2100

"UL (dB)""DL (dB)"– Gain Indication.

The displayed value shows real-time uplink and downlink gain. These values

will change slightly as the ALC or ISO makes changes to the gain to optimize

Band display

LTE700

Cell800

PCS1900

AWS2100

8 / 20