HiBoost SLT Pro20-5S-BTW Manual del usuario - Página 5
Navegue en línea o descargue pdf Manual del usuario para Extensor HiBoost SLT Pro20-5S-BTW. HiBoost SLT Pro20-5S-BTW 20 páginas. Mobile signal booster
Imprimir página
1.2 Installation Preparation
Before you install
- Make sure you have sufficient cable length between the proposed
outdoor/indoor antenna location and booster connector.
. Make sure the position you install the booster is near to an existing electrical
outlet, well ventilated, and away from excessive heat, moisture, and direct
sunlight.
Tools Required
Phillips Screwdriver
Drill
Mobile Phone
Before you get started, you will need to plan the layout of your system. This
involves finding the location with the strongest received signal from the cellular
tower, as well as antenna, booster, and cable placement.
General installation steps:
1. Find the strongest received signal for the location of the outdoor antenna.
2. Install the outdoor antenna on the roof to obtain the strongest downlink signal
from the local cellular towers. It should also be as far away as possible from
where you plan to place the indoor antenna (vertical separation is more
important than horizontal separation).
. Install the indoor antennas where you want to improve the signal level.
4. Mount the booster, connect the cables from the outdoor antenna and indoor
antenna at the designated ports, and connect the booster to the AC supply
(make sure all the cables are connected before applying power).
1.3 How to find the location with the strongest received signal
The outdoor signal strength the booster receives directly affects the efficiency of
the indoor coverage. That is why it is crucially important to install the antenna at
a good location and point it properly towards a tower where signal reception is
the strongest.
There are many methods that can be used to find the strongest signal from the
cellular towers. One is to use the LCD display on the booster that shows the
downlink power output of the booster in each band, the other is to use a mobile
phone or mobile phone app to test signal strength, and the third is to use a
5/18